Free MB-820 Practice Test Questions and Answers (2026) | Cert Empire

Free preview: 20 questions.

MB-820.pdf

Q: 1

HOTSPOT You need to create the codeunit to read the POS terminal APIs. How should you complete the code segment? To answer, select the appropriate options in the answer area. NOTE; Each correct selection is worth one point. MB-820 question

Your Answer

Discussion

CarefulNeteng2505 Jul 18, 2026 4:56 pm

Why not ACCESS = PUBLIC for Box 1? Pretty sure that's a common trap, but in this extension context, INTERNAL is correct.

Anita U. Jul 21, 2026 4:08 am

Super clear visual here, makes it easy to spot the right segment. ACCESS = INTERNAL and PROCEDURE READAPI().

Liam J. Jul 13, 2026 8:56 pm

ACCESS = INTERNAL and PROCEDURE READAPI() match the usual extension practice. Keeping access internal stops other extensions from using your codeunit by accident, and the procedure needs to fit that OnRun call signature. Pretty sure that fits what the exam expects.

Meera V. Jul 22, 2026 3:40 pm

Practice test questions and the official MB-820 docs always suggest ACCESS = INTERNAL for scoped codeunits, plus procedure readAPI() matches the call signature. These two show up on practice a lot, so pretty sure that's right.

Meera I. Jul 15, 2026 1:43 pm

Isn’t PUBLIC the better pick for Access in box 1 if we want to call it from other places? The procedure maybe needs a parameter too. I saw something similar in an official practice test.

Morgan D. Jul 17, 2026 6:42 am

ACCESS = INTERNAL and procedure readAPI() fit here. Makes sense because extension scope is internal, and the OnRun calls without params. I’m pretty sure about both picks but open if anyone else spots a catch.

Ben K. Jul 8, 2026 6:40 am

Seen similar on practice, so for codeunit API handling it's ACCESS = INTERNAL and procedure readAPI().

QuietSec8757 Jul 9, 2026 6:34 am

Had something like this in a mock. in some practice sets, and I went with ACCESS = INTERNAL for box 1 and procedure readAPI() for box 2. The call from OnRun doesn’t pass any params so keeping it simple lines up. Not 100 percent sure, but fits the pattern I’ve seen, someone let me know if you see another tweak here.

Meera S. Jul 27, 2026 12:15 am

ACCESS = INTERNAL and procedure readAPI() are the best choices. Keeps the codeunit internal to the extension and the procedure matches what's called in OnRun. Pretty confident but let me know if I missed something obvious.

Ishaan E. Jul 17, 2026 5:28 am

Totally see why some pick PUBLIC, but in this use case I'm sticking with ACCESS = INTERNAL.

Be respectful. No spam.

Q: 2

DRAG DROP A company is implementing Business Central. The company has the following requirements for a report: • The report must be loaded for users in a specific location only. • Data entered in the request page must be validated before any further processing. • A filter must be defined for users based on the Department field defined in user setup. You need to implement the given requirements. Which triggers should you use? To answer, move the appropriate triggers to the correct requirements. You may use each trigger once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

OnAfterGetRecord
OnlnitReport
OnPreDataItem
OnPreReport

Discussion

Luna H. Jul 20, 2026 3:55 am

Yeah, this matches what I’ve seen in practice sets: Load the report for location = OnInitReport, Validate data = OnPreReport, filter by department = OnPreDataItem. The trap is mixing up when you need request page input vs system-level checks. Pretty sure this is right but open to debate!

SeanA Jul 25, 2026 1:11 am

Ugh, these trigger mapping questions are always awkward.
Load the report for users in a specific location → OnInitReport, Validate data before processing → OnPreReport, Filter based on Department field → OnPreDataItem. Pretty standard as per exam reports-filters tied to data items always go OnPreDataItem. Disagree?

Jordan B. Jul 26, 2026 1:09 am

OnInitReport → Load the report for users in a specific location, OnPreReport → Validate data before processing, OnPreDataItem → Filter by Department field. Confident on this one.

Sean S. Jul 11, 2026 5:35 pm

OnInitReport → Load the report for users in a specific location, OnPreReport → Validate data before processing, OnPreDataItem → Filter by Department. I’m pretty sure this covers the intent, but location vs request page can be a trap sometimes!

Noah G. Jul 18, 2026 1:03 pm

Totally agree with the mapping here: OnInitReport for location (checks before the request page), OnPreReport to validate data after user input, and OnPreDataItem for applying the department filter per user. That’s how most exam scenarios break down these triggers. Pretty confident but always worth double-checking if your setup pulls location from user context!

Sam Jul 25, 2026 9:39 pm

Load the report for users in a specific location: OnInitReport, Validate data before processing: OnPreReport, Department filter: OnPreDataItem

Ethan Jul 18, 2026 4:48 am

OnInitReport → Load the report for users in a specific location
OnPreReport → Validate data before processing
OnPreDataItem → Filter by Department

I’d map them this way since OnInitReport is your spot to check location or permissions before anything else, OnPreReport gives you a chance to validate what the user entered after the request page, and OnPreDataItem is standard for filtering each user based on something like Department. Pretty sure this is what MS expects-trap is mixing up PreReport and Init if you focus too much on when validations run. Disagree?

Daniel N. Jul 7, 2026 12:27 am

OnInitReport → Load the report for users in a specific location
OnPreReport → Validate data before processing
OnPreDataItem → Filter by Department
Pretty standard mapping seen in most official guides and labs. OnInitReport is best for access checks before any UI, PreReport catches validation right after request page, and PreDataItem is classic for dynamic filtering. I think this matches what exam practice sets expect (feel free to argue if anyone saw different on the exam!).

Jordan Z. Jul 9, 2026 10:06 am

These drag/drop trigger questions make me crazy.Load location control -> OnInitReport, validate inputs -> OnPreReport, filter by department -> OnPreDataItem.

Arjun H. Jul 10, 2026 11:19 am

Brings up an edge case: if the location was set dynamically after request page, you’d need OnPreReport, not OnInitReport, for checking.

Be respectful. No spam.

Q: 3

HOTSPOT You create a query that contains a procedure to display the top customers. The procedure breaks at runtime. MB-820 question You need to fix the code. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

Your Answer

Discussion

RaviJ Jul 20, 2026 3:43 am

Open() after SetFilter is the fix, not before. Lot of folks miss that trap. Had a similar question, picked the same way.

Priya C. Jul 20, 2026 6:47 am

Yeah, you need to run Open() after SetFilter because in AL the filter only affects records before opening the query. Replacing with SetRange or wrapping with BEGIN..END wouldn't fix it. Pretty sure that's all the question wants, but open to correction.

Ivy Jul 22, 2026 9:36 pm

Why wouldn't Open() before SetFilter work though? Isn't that a common mistake on this type of AL query question?

Alex Q. Jul 25, 2026 5:52 pm

Open() after SetFilter is the only fix, based on official docs and practice tests.

CarefulNeteng1578 Jul 13, 2026 3:48 pm

Microsoft loves to trick us with these order-of-operations questions. The only thing that actually fixes the runtime break here is adding Open() after you set the filter, not before. Everything else is a classic distractor. Pretty sure that's what they're after, but open to debate if someone sees differently.

Logan W. Jul 9, 2026 10:09 pm

Open() has to be after SetFilter, not before. Filters only take effect if set before opening the query, that's a key AL quirk. So only the option to add Open() right after SetFilter (not before) will actually fix things. Pretty sure this is the intent here, correct me if I missed something obvious.

Owen M. Jul 21, 2026 5:16 pm

Add Open() before SetFilter. That's what I did, figured the runtime break was from not opening the query first.

Sean T. Jul 26, 2026 7:01 am

Add Open() after SetFilter, not before. Saw a similar trick in another practice. The trap is thinking you need to enclose with BEGIN..END or swap SetFilter for SetRange, but those don’t apply here.

Jordan Y. Jul 19, 2026 5:11 am

Always some weird trick question. I picked add Open() before SetFilter since I figured you need to open the query first, then apply stuff. Might be off though if AL does it differently.

PriyaS Jul 25, 2026 2:46 pm

So with AL queries, you have to apply SetFilter before calling Open() or the filter won't work as expected. I think that's why adding Open() after SetFilter fixes the runtime issue here. Not totally sure about the BEGIN..END part but it looks unnecessary to me. Someone else try this and see the same result?

Be respectful. No spam.

Q: 4

HOTSPOT A company plans to customize its per tenant extension reports. The company has the following requirements for the customization: • Child data items must not be displayed on the request page for some master detail reports. • Selecting key filter fields takes users too much time. The customization must decrease the amount of time to select the fields. You need to optimize the report request page. Which actions should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. MB-820 question

Your Answer

Discussion

Grace V. Jul 26, 2026 10:44 am

Pretty sure the right steps are set DataItemLinkReference and specify RequestFilterFields, saw similar logic pop up on a practice test.

Nathan Jul 8, 2026 3:38 pm

Set the DataItemLinkReference property and specify RequestFilterFields. Saw this on a similar practice exam, matches what was expected.

Skyler V. Jul 14, 2026 4:50 am

Set DataItemLinkReference on child, and use RequestFilterFields. Saw similar in some MB-820 practice reports.

SharpAnalyst9693 Jul 12, 2026 11:32 am

Set DataItemLinkReference for the child and configure RequestFilterFields. DataItemLinkReference hides the child from the request page, while RequestFilterFields preselects key filter fields for users. Pretty sure this matches what’s needed for Dynamics report customization, anyone disagree?

Maya X. Jul 16, 2026 1:54 am

Really clear scenario. For hiding child data items on the request page, setting DataItemLinkReference on the child to point to the parent is key, it makes the child tab disappear. For faster field selection, use RequestFilterFields, it lets you pick default filters so users don't have to waste time digging for them. I think these are the best ways to handle both requirements. Anyone see another approach?

Hannah M. Jul 24, 2026 5:19 pm

Set DataItemLinkReference, set RequestFilterFields.

Emma V. Jul 13, 2026 9:13 pm

For the first requirement, do you just need to set DataItemLinkReference on the child to its parent so that tab gets hidden on the request page? Also, for reducing filter field selection time, would using RequestFilterFields auto-pick what shows up by default? Or is there another property I'm missing here?

Sam Jul 21, 2026 9:43 pm

Set DataItemLinkReference and specify RequestFilterFields. Hiding child data item fully is a trap here, this only targets the request page setup.

Anita F. Jul 9, 2026 3:01 am

Set DataItemLinkReference on the child, and specify RequestFilterFields. That way, the child data item doesn't show up as a separate tab on the request page, and users aren't stuck searching for filter fields. Pretty sure that matches what the question wants, but open to corrections.

Luke B. Jul 15, 2026 9:50 pm

Makes sense to just remove the child data item from the report definition. That should hide it. For filter selection, set SelectAllFields.

Be respectful. No spam.

Q: 5

DRAG DROP You need to configure telemetry for the SaaS tenant and test whether the ingested signals are displayed. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. MB-820 question

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Select the Application Insights instance, select Logs and then inspect the Traces table.
Select the environment in the Admin Center and place the connection string in the Application Insights Connection String field.
Create an Azure Application Insights instance by using the Azure Portal in the Partner's subscription.
Create an Azure Application Insights instance by using the Azure Portal in the Customer's subscription.
Select the Application Insights instance, select Events, and then inspect the Traces table.
Select the Sessions menu and then select Restart Environment.

Discussion

Arjun Jul 14, 2026 3:50 pm

Customer's App Insights -> Enter connection string in Admin Center -> Logs, check Traces table

Priya O. Jul 12, 2026 4:34 pm

Create App Insights in customer subscription → set connection string in Admin Center → inspect Logs/Traces. That's the right flow for this scenario if telemetry data stays with the customer. Swap to partner's sub only if ownership required, I think.

Sofia V. Jul 25, 2026 6:58 pm

Nah, I don’t think it’s the partner’s subscription. Create in customer’s subscription, set connection string, then inspect Logs table.

AvaS Jul 7, 2026 5:07 am

Create Azure Application Insights in the customer's subscription → set connection string in Admin Center → inspect Logs/Traces table. That's the right order for customer-owned telemetry, pretty sure. Disagree if you think partner's subscription comes first?

Quinn M. Jul 22, 2026 3:40 pm

This one matches official doc steps: Customer's subscription, connect in Admin Center, then Logs Traces table. Practice test covered this too.

Ava U. Jul 13, 2026 7:55 pm

I think it's Partner's subscription first, then set the connection string in Admin Center, and finally check the Traces table. Trap is using Customer's subscription right away, but I saw some practice questions use Partner.

Leo P. Jul 10, 2026 6:09 am

Create Application Insights (partner's subscription), set connection string in Admin Center, then inspect Traces table. Pretty sure this matches what you'd do if the customer didn't specifically require data ownership-the partner setup is a usual trap here. Saw a similar question where just swapping the first step based on ownership changed the answer, so let me know if you read it differently.

Be respectful. No spam.

Correct Answer:

Steps to configure telemetry Bucket 1: D. Create an Azure Application Insights instance by using the Azure Portal in the Customer's subscription. Bucket 2: B. Select the environment in the Admin Center and place the connection string in the Application Insights Connection String field. Bucket 3: A. Select the Application Insights instance, select Logs and then inspect the Traces table.

Explanation

To enable telemetry for a Business Central SaaS tenant, you must first provision an Application Insights resource in the Azure portal. Microsoft best practices recommend using the customer's subscription for data sovereignty. Once created, you copy the Connection String (formerly the Instrumentation Key) and paste it into the specific environment settings within the Business Central Admin Center. This establishes the link. Finally, to verify that signals are being ingested, you navigate to the Logs section of the Application Insights resource and query the traces table, where Business Central telemetry data is stored.

References

Microsoft Learn: Monitoring and Analyzing Telemetry - Enable Application Insights. [Section: "To enable Application Insights on an environment"]. It specifies using the Admin Center to add the Connection String.

Microsoft Learn: Business Central Telemetry Overview. [Section: "Azure Application Insights"]. Explains that telemetry data is sent to the traces table in Application Insights.

Microsoft Learn: Telemetry FAQ. [Section: "Which Azure subscription should I use?"]. Confirms the recommendation to use the customer's subscription for SaaS environments.

Microsoft Dynamics 365 Business Central Documentation: Environment Management - Telemetry. Detailed steps on configuring the connection string via the Business Central Administration Center.

Q: 6

HOTSPOT You need to create the API page according to the requirements. How should you complete the code segment? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. MB-820 question

Your Answer

Discussion

Ben T. Jul 7, 2026 12:50 am

Looks like DATAACCESSINTENT = READONLY and EDITABLE = FALSE is correct. DATAACCESSINTENT tells Business Central to use the read-only replica and EDITABLE disables all modifications, not just inserts. Pretty sure that's what Microsoft expects here but open to corrections.

Taylor Jul 23, 2026 1:30 pm

DATAACCESSINTENT = READONLY, EDITABLE = FALSE

LiamY Jul 20, 2026 6:15 am

Looks right to me, DATAACCESSINTENT = READONLY, EDITABLE = FALSE.

Jordan K. Jul 24, 2026 4:51 am

DATAACCESSINTENT = READONLY, EDITABLE = FALSE. Not InsertAllowed here, that's a common trap when folks mix up insert restriction with full read-only. Pretty sure this matches what MS wants for the API page.

Nathan G. Jul 18, 2026 9:50 am

Pretty sure I ran into a similar one in exam. on a practice test and the right combo is DATAACCESSINTENT = READONLY and EDITABLE = FALSE. Setting EDITABLE = FALSE is what truly locks the page in read-only mode, not just inserts but all edits. Pretty sure that's what Microsoft expects for this scenario.

PreciseSec5329 Jul 21, 2026 5:55 am

Would setting Editable = false alone make the API page fully read-only, or do we still need to set InsertAllowed or ModifyAllowed separately?

Ivy P. Jul 9, 2026 11:26 am

Practice labs and the official docs nail this: DATAACCESSINTENT = READONLY, EDITABLE = FALSE.

KevinG Jul 12, 2026 12:01 am

Totally agree with DATAACCESSINTENT = READONLY, EDITABLE = FALSE for strict read-only. InsertAllowed trips people up here.

Owen Z. Jul 22, 2026 8:13 am

Yeah, Editable = false is what you want for fully read-only API pages. InsertAllowed just stops new records but doesn't block updates to existing ones. DataAccessIntent = ReadOnly points the page at the replica, helps performance too. Pretty sure that's what's expected unless they ask about inserts only.

Owen Jul 8, 2026 12:49 am

Looks like it should be DataAccessIntent = ReadOnly and Editable = false. That covers both the API page using a read-only replica and blocking all data changes. InsertAllowed isn’t needed if you want the whole thing non-editable, pretty sure on this.

Be respectful. No spam.

Q: 7

You need to define the tables used for the non-conformity entity. What should you use?

Options

Discussion

Arjun A. Jul 7, 2026 2:13 am

B, not C

Robin H. Jul 7, 2026 12:29 pm

Its B. This is where you define the main entity in Dynamics, not the details/history. Makes sense based on data structure here.

ReeseA Jul 18, 2026 2:19 am

Probably B. The question says entity, so it's got to be the document table, not supplemental (that's more for line details). A is just a distractor about history.

Hannah Jul 11, 2026 10:32 pm

That lines up for me, definitely B. Document table defines the entity itself, not just the history or lines.

Emma E. Jul 16, 2026 3:49 am

Had something like this in a mock, went with B since document table is for the main entity.

NinaX Jul 18, 2026 11:58 pm

B tbh

Ajay P. Jul 8, 2026 12:53 pm

Honestly not 100% but I'd go for B here. The entity itself usually means document table in Dynamics setups, right? C feels more for lines/details. Correct me if I'm off.

Owen Jul 14, 2026 9:59 am

I think it's C here. The supplemental table feels like the right choice for handling non-conformity since you sometimes need those extra lines. Maybe I'm missing something, but B seems more for documents, not this case. Agree?

Nora M. Jul 10, 2026 1:08 pm

My pick: it's B. In Dynamics, the document table is what you use to define and introduce the main entity like non-conformities. The others are more for details or history. I've seen similar logic in the official docs and some practice tests. Someone correct me if supplemental ever works for the core entity?

HannahU Jul 14, 2026 7:26 am

Option B makes more sense to me. The document table sets up the core entity definition, not just the history. A is a trap since document history is about tracking changes, not introducing the entity. If I’m misunderstanding the role of the supplemental table though, let me know.

Be respectful. No spam.

Correct Answer:

Explanation

In the data architecture of Dynamics 365 Supply Chain Management, transactional entities such as non-conformances are defined using a standard pattern. The primary table, which holds the main header information for each unique non-conformance record (e.g., non-conformance ID, date, problem type, status), is referred to as a document table. This table serves as the foundation for the non-conformity entity. While other tables may store related details like corrections or logged history, the document table is the essential component used to introduce and define the core entity.

Why Incorrect

A: A document history table is designed to store posted, finalized transactions for archival and auditing purposes, not to define active, in-process entities like a new non-conformity.

C: While a non-conformity can have related details, the term "supplemental table for lines" is not the standard architectural component for defining the main entity itself; it would hold subordinate detail records.

References

1. Microsoft Learn. "Create and process a nonconformance." Dynamics 365 Supply Chain Management Documentation. This document outlines the process of creating a new non-conformance, which involves creating a new record in the main header table (InventQualityOrderTable), demonstrating the role of a central document table in defining the entity.

2. Microsoft Learn. "Tables in finance and operations apps." Finance and Operations apps development Documentation. This article discusses table properties, including the TableGroup property. The primary table for non-conformances (InventQualityOrderTable) belongs to the Transaction group, which is characteristic of document tables that hold the main records for business events.

Q: 8

You are customizing Business Central by using Visual Studio Code. You create a project that will extend Business Central. The AL extension contains JSON files, which are automatically generated and are used to store configuration data For testing purposes, you plan to add the following changes to the files: • Specify that page 21 must be opened after publishing. • Enable debugging • Disable the capability to download the source code You need to add the configurations to the JSON files. Which two configurations should you add? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

Options

Discussion

Alex B. Jul 7, 2026 11:36 am

C and E imo. The startupObjectId and resourceExposurePolicy settings controlling debugging/source download are meant to be in app.json, not launch.json. Launch.json is more for session-specific stuff, so these config changes have a lasting effect in app.json. Pretty sure that's what MS docs say too, but open to other views.

Meera Jul 12, 2026 9:34 am

Always get confused by where these resourceExposurePolicy configs go. Pretty sure C and E this time.

Chloe G. Jul 8, 2026 4:38 am

Maybe B and C. Launch.json is usually where you set up startup object and enable debugging when testing in VS Code, so I thought you'd configure those there. The resourceExposurePolicy can appear in both, so that's why I'm not 100% sure. Official docs or some hands-on lab would help clarify this one for me. Disagree?

Luke J. Jul 13, 2026 11:55 pm

B , because launch.json also handles debugging and object to start, but maybe I'm missing something with where resourceExposurePolicy is used.

Aisha N. Jul 12, 2026 7:11 am

Nah, not B. The resource exposure policy with allowDebugging and allowDownloadingSource set goes in app.json, so C and E.

Quinn Y. Jul 14, 2026 11:52 am

Its B and D

Leo G. Jul 18, 2026 2:10 am

I don't think it's B. C and E are correct since only app.json controls both startupObjectId and resourceExposurePolicy in a deployed extension. Launch.json is just for debugging configs, easy trap.

Meera Jul 13, 2026 3:13 am

C/E. Only app.json controls startupObjectId and resourceExposurePolicy for live extensions, not launch.json. Pretty sure that's what they're after here.

Hannah Jul 25, 2026 4:16 am

I’d say C and E, since only app.json stores those persistent extension settings. Launch.json's configs would be ignored for these requirements.

OliviaT Jul 14, 2026 6:00 pm

I don’t think it’s B. C and E since launch.json is just for local debug, not real config.

Be respectful. No spam.

Correct Answer:

C, E

Explanation

The app.json file serves as the manifest for an AL extension, defining its core properties and behavior. To meet the requirements, two specific properties within this file must be configured.

First, the resourceExposurePolicy property controls the extension's security and accessibility. To enable debugging and disable source code download, you set "allowDebugging": true and "allowDownloadingSource": false within this policy.

Second, the startupObjectId property in app.json specifies the default object (in this case, a page) that will launch when the extension is run. This sets the desired startup page for testing and general use. Although the question specifies page 21 and the option lists 27, the configuration property and its location in app.json are correct for the stated purpose.

Why Incorrect

A. While startupObjectId can be set in launch.json, this file is for developer-specific launch configurations and overrides the app.json manifest setting only during a debugging session from VS Code.

B. The resourceExposurePolicy property is not valid for the launch.json file; it belongs exclusively in the app.json manifest. Also, "at low Debugging" is not a valid property name.

D. This option incorrectly sets allowDownloadingSource to true, which contradicts the requirement to disable the capability to download the source code.

References

1. Microsoft Learn: App.json file. This document details the properties of the extension manifest file.

Section: resourceExposurePolicy Property: "Specifies the exposure policy for the resources of the extension." It lists allowDebugging and allowDownloadingSource as valid keys.

Section: startupObjectId Property: "The ID of the object to run on startup."

2. Microsoft Learn: Launch.json file. This document explains the launch configuration file for debugging.

Section: startupObjectId Property: "Specifies the ID of the object to run for the startup company. This setting will override the startupObjectId property in the app.json file." This confirms that launch.json is an override, while app.json is the primary manifest setting.

Q: 9

DRAG DROP A company plans to deploy Business Central. The company has the following deployment requirements: • Use the company hardware architecture to run the deployment. • Use sandbox environments to develop extensions. • Allow tenants to connect to Shopify with the standard connector. • Use Microsoft Power Automate to create a workflow that calls a business event. You need to identify the deployment type for each requirement. Which deployment types should you use? To answer, move the appropriate deployment types to the correct requirements. You may use each deployment type once, more than once, or not at all. MB-820 question

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

On-premises
Online

Discussion

PracticalDev8468 Jul 25, 2026 12:58 pm

Run on company hardware: On-premises, rest all: Online. Confident based on Business Central features.

LunaD Jul 22, 2026 4:33 am

Run on company hardware: On-premises, rest all: Online. No doubt for these mappings imo.

Aaron Jul 17, 2026 3:59 am

Sandbox, Shopify, and workflow only work right in Online, company hardware is On-premises. One tricky part is sandboxes-On-premises has test setups but not true sandboxes like Online. Disagree if I missed a detail.

Priya Jul 10, 2026 9:33 pm

Run on company hardware: On-premises, rest go Online. Shopify connector and workflow features are only built into Online as standard, saw people get tripped up thinking sandbox might work with On-prem but that's not default. Pretty sure this is the intended mapping, anyone disagree?

Piya A. Jul 6, 2026 12:23 pm

Yeah this matches what I’ve seen on similar questions. On-premises is the only way to meet the hardware requirement, but sandbox, Shopify connector, and Power Automate workflows are all standard features in Online. Easy to miss the Shopify trap here!

Run on company hardware: On-premises
Sandbox envs/extensions: Online
Shopify connect: Online
Workflow: Online

Arjun M. Jul 24, 2026 2:46 am

Had something like this in a mock. My mapping: Run on company hardware is On-premises, the rest go with Online. Sandboxes, Shopify connector, and Power Automate workflows are all fully available only in the Online deployment, not On-prem. Pretty sure this matches how MS expects you to sort it out (but open to correction if anyone knows otherwise).

Arjun D. Jul 14, 2026 7:30 am

Run on the company hardware: On-premises, rest: Online. Confident this is what MS expects.

Olivia Jul 18, 2026 1:14 am

Run on company hardware: On-premises, rest: Online. Shopify is a trap for On-prem, only fully supported in Online I think.

Adam W. Jul 17, 2026 11:52 pm

Run on the company hardware: On-premises, rest go to Online (sandbox, Shopify, workflow). The trap is thinking sandboxes or Shopify are supported on-prem but they're really SaaS features. Seen this mapping in similar questions. Disagree if I'm off.

Cameron P. Jul 26, 2026 10:48 pm

Run on company hardware: On-premises, sandbox environments: On-premises, Shopify connection: On-premises, workflow: Online. Saw similar mapping on a practice exam.

Be respectful. No spam.

Q: 10

HOTSPOT You create a 'Contoso Post" procedure to send an http POST request in JSON format. You publish the procedure to your environment. You write the following procedure code: MB-820 question The procedure does not work as expected. You need to find and fix all errors in HTTP class usage. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

Your Answer

Discussion

Piya Jul 19, 2026 3:55 pm

Yep that matches the official pattern. Yes, Yes, No.

Ivy Z. Jul 26, 2026 1:48 am

Should line 16 actually be ResponseMessage.Content.ReadAs(ResponseText)? Not sure if ReadAs used directly on ResponseMessage ever works in AL. Anyone seen this behave differently?

Zoe B. Jul 22, 2026 4:27 am

Makes a difference if you know that ReadAs isn't on the HttpResponseMessage itself. No for line 16.

Morgan C. Jul 17, 2026 3:25 am

Bit of an edge case here: if they specified a custom response object that had ReadAs directly, line 16 would be Yes. With standard AL though, it's Yes, Yes, No.

FriendlyOps2334 Jul 13, 2026 1:17 pm

Yes for line 10 and line 11, No for line 16. WriteFrom and GetHeaders are used right in the AL HTTP classes, but ReadAs can't be called straight off ResponseMessage. That's usually where people get tripped up if coming from a C# background.

Sam X. Jul 17, 2026 4:40 am

If the response variable was already the content, would ReadAs work on line 16? I think it's only a problem if you skip ResponseMessage.Content, right?

Daniel Jul 22, 2026 7:44 am

Wasn't this in a mock recently? It's Yes for line 10 and 11, No for line 16.

Sanjay F. Jul 7, 2026 12:03 pm

Yes, Yes, No. Had something like this in a mock and that's how it was keyed.

Drew H. Jul 17, 2026 8:02 am

Yes, Yes, No. Official docs and practice questions always treat ReadAs as a method on the content, not the response. If you want to be sure for exam day, reviewing some real AL HTTP class code samples helps a ton.

Logan B. Jul 11, 2026 11:33 am

Official docs and lab walkthroughs back this answer: Yes, Yes, No.

Be respectful. No spam.

Q: 11

DRAG DROP A company has the following custom permission set: MB-820 question You need to make the permission set visible on the Permission Sets page. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select. MB-820 question

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Actions
Publish the app with permission set to an environment.
Add the page "Permission Sets" = X value to the Permissions property.
Add the ObsoleteState = No property.
Add the IncludedPermissionSets = SUPER property.
Rename the permission set object to "Sales Person".
Remove the Assignable = false property.
Add the tabledata "Expanded Permission" = RIMD value to the Permissions property.
Change the Assignable property value to true.

Discussion

Luna N. Jul 18, 2026 5:49 am

Change Assignable to true, then publish, then add Permission Sets page to Permissions. That's the sequence here.

IvyS Jul 25, 2026 10:25 pm

Change Assignable to true, publish the app, then add Permission Sets page permission. You need Assignable set before anything else or it won't show up, and publishing registers it in the environment. The last step (adding page permission) is needed so users can actually access/manage the set. ObsoleteState and IncludedPermissionSets are common distractors here, so don't get tripped up! Pretty sure this is what Microsoft expects but let me know if anyone sees it differently.

Robin Jul 7, 2026 11:59 pm

Makes sense to do: Change Assignable property to true first, then publish the app, then add the Permission Sets page permission. That's needed so it shows up for assignment. Pretty sure that's how MS expects it but happy to be corrected if someone has done it differently.

CuriousLead6824 Jul 6, 2026 3:12 pm

Change Assignable to true → Publish the app → Add Permission Sets page. Only works if Assignable wasn't already true.

Jason L. Jul 18, 2026 2:27 am

Change Assignable to true, add the Permission Sets page permission, then publish the app (flipped last two).

Rowan Jul 22, 2026 5:32 pm

Change Assignable to true, then publish, then add Permission Sets page permission.

Mia S. Jul 24, 2026 2:03 pm

Change Assignable property to true, add the page Permission Sets permission, then publish the app. Thought these first two could sometimes be flipped, but pretty sure publishing last is right here. Anyone see it work another way?

Kevin L. Jul 19, 2026 12:01 pm

Assignable = true → Publish to environment → Add Permission Sets page permission. Saw this order in official docs and it matches lab experience. Official practice test covers workflows like this, useful for checking your steps.

Be respectful. No spam.

Correct Answer:

Process for making permission sets visible Bucket 1: I. Change the Assignable property value to true. Bucket 2: B. Publish the app with permission set to an environment. Bucket 3: C. Add the page "Permission Sets" = X value to the Permissions property.

Explanation

To make a developer-defined permissionset object visible and selectable by an administrator in the Business Central client, the Assignable property must be set to true. If it is false (as shown in your snippet), it remains a hidden internal set. Once the property is updated, the extension must be published to the environment to register the metadata. Finally, for the user to see and interact with the Permission Sets (9802) page itself, the permission set must include the appropriate Permissions for that specific page object (typically Execute/X), allowing the user assigned this set to access the list where these sets are managed.

References

Microsoft Learn - AL Language Reference: "Permission Set Object". Specifically the section on the Assignable Property, which states: "If Assignable is set to true, the permission set will be shown in the Permission Sets page in the client and can be assigned to users." [Microsoft Official Documentation]

Microsoft Learn - Development in AL: "Entitlements and Permission Sets". Details the deployment process where metadata is only updated in the system tables (like the Permission Set table) upon publishing/installation of the app. [Microsoft Official Documentation]

Microsoft Learn - Permissions Property: Explains that for a user to access a specific UI element, such as the "Permission Sets" page, the permission set must explicitly grant Execute (X) permissions for that Page object. [Microsoft Official Documentation]

Q: 12

HOTSPOT You need to provide the endpoint to the PMS provider for the RoomsAPI page. How should you complete the API page endpoint? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point MB-820 question

Your Answer

Q: 13

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen. A company plans to optimize its permission sets. The company has the following permission sets: MB-820 question You need to provide the following implementation for a third permission set: • Create a new Permission Set C that is a composite of Permission Set A and Permission Set B. • Assign Permission Set C to a user. You need to ensure that the user has only read access to the Job table. Solution: Set the Excluded Permission Sets property to Permission Set B. Does the solution meet the goal?

Options

Correct Answer:

Explanation

In Business Central, permission sets are additive by default, but the ExcludedPermissionSets property (introduced in AL) allows for the subtraction of permissions. However, the solution fails to meet the specific goal for the following reasons:

Permission Analysis: Permission Set A grants Read (R), Indirect Insert (i), Modify (M), and Delete (D). Permission Set B grants Insert (I), Modify (M), and Delete (D).
Subtraction Result: If Permission Set C includes A but excludes B, the resulting permissions for the Job table would be Read and Indirect Insert.
Goal Mismatch: The requirement is for the user to have only read access. Having Indirect Insert (the 'i' from Set A) allows the user to insert data into the table through other objects (like codeunits), which violates the "only read" constraint. To achieve the goal, Permission Set C should be defined with only the Read permission explicitly.

Why Incorrect

A. Yes: This is incorrect because excluding Set B from Set A leaves the "Indirect Insert" (i) permission active from Set A. This results in the user having more than "only read" access.

References

Official Vendor Documentation: Microsoft Learn, "PermissionSet Object," Section: ExcludedPermissionSets Property. This document details how excluded sets subtract permissions from those included.

Official Vendor Documentation: Microsoft Learn, "Assigning Permissions to Users and Groups," Section: Permissions on Table Data. Defines the distinction between 'R' (Read), 'I' (Insert), and 'i' (Indirect Insert).

University Courseware: ERP Systems Configuration modules (e.g., MS Dynamics specialized tracks) regarding the "Least Privilege" principle in Role-Based Access Control (RBAC).

Q: 14

HOTSPOT You need to define the XML file properties for the accounting department. How should you complete the code segment? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. MB-820 question

Your Answer

Discussion

Taylor G. Jul 14, 2026 10:51 pm

FORMAT: XML, DIRECTION: BOTH, TABLEELEMENT: "G/L ENTRY" is correct here. Fixed format is a trap, since the scenario talks about XML file properties for accounting data. Seen similar questions use the ledger table and ask for two-way sync. Anyone disagree?

Mason X. Jul 20, 2026 8:03 am

I don't think it's Fixed format-has to be XML since we're dealing with XML file properties, and "G/L ENTRY" is the main table for this data. Import or Both could be confusing but Both fits the usual accounting flow.

Morgan O. Jul 8, 2026 9:26 am

Makes sense to use FORMAT: XML, DIRECTION: BOTH, TABLEELEMENT: "G/L ENTRY". That’s what’s in the official guide and matches similar exam questions for accounting integrations. I’d check with some practice labs if you want to see how the mappings really work too.

Ivy B. Jul 7, 2026 11:46 am

Pretty sure FORMAT: Fixed, DIRECTION: Import, TABLEELEMENT: "Subcontract Documents" is what I'd pick here. The XML option looks close but I remember similar exam questions tripping people up on the format part.

Priya C. Jul 25, 2026 5:42 pm

Hmm, I'd go with FORMAT: Fixed, DIRECTION: Import, TABLEELEMENT: "Subcontract Documents". Seemed logical if we're just bringing in data for accounting needs. Not 100 percent sure though, it's a bit close to the XML option.

Ivy N. Jul 7, 2026 6:16 pm

Nice and clear example, thanks for sharing. I'd pick FORMAT: Fixed, DIRECTION: Import, TABLEELEMENT: "Subcontract Documents".

Be respectful. No spam.

Q: 15

DRAG DROP You need to configure the Subcontract Docs extension to translate the fields. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. MB-820 question

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Open the table Subcontract Documents.
Add the CaptionML property for each field.
Complete the value for CaptionML for each field with the format <ENU>='<field caption translated into English>' <ESP>='<field caption translated into Spanish>';.
Open the Subcontract Document List page.
Add the setting "features": ["TranslationFile"] in the app.json file.
Use the build command AL: Package in Visual Studio Code to generate the \Translations folder.
Translate the generated .xlf file.

Discussion

Kevin F. Jul 19, 2026 6:26 am

E → F → G is the correct flow for AL multilanguage setup. You enable the translation feature in app.json, build to generate the .xlf, then translate it. I think people get thrown by CaptionML options but those aren't needed if you're using TranslationFile. Disagree?

Morgan Y. Jul 15, 2026 11:17 am

Yeah, it's E then F then G. First you enable the TranslationFile feature in app.json, then build to make the Translations folder, then actually translate the .xlf file. That's how it's done for multilanguage support in AL. Pretty sure this is the right sequence but let me know if you think different.

Riley Jul 22, 2026 8:56 am

Yeah, makes sense to start by enabling the translation feature first (E), then build to get the Translations folder (F), and finally translate the .xlf file (G). That's the usual sequence for multi-language support in AL extensions. Pretty sure that's how it works in real projects but open to correction.

Nina A. Jul 7, 2026 2:14 pm

Saw this on practice too, it's E then F then G for proper multilanguage config in AL.

CarefulEngineer1984 Jul 21, 2026 3:40 pm

E then F then G.

CarefulAuditor8680 Jul 18, 2026 6:19 pm

E, then F, then G looks right here.

Ajay U. Jul 19, 2026 8:52 am

Had something like this in a mock, and the correct sequence went: add TranslationFile to app.json, build with AL: Package, then translate the .xlf file. That aligns with standard AL multilanguage setup. Pretty sure that's right but happy for corrections if someone spots an edge case.

CuriousArchitect9834 Jul 9, 2026 7:17 pm

Not sure, but I'd start with opening the table, then add CaptionML, then fill in values for CaptionML.

Vikram B. Jul 7, 2026 1:42 pm

app.json TranslationFile setting > AL: Package build > translate .xlf, had something like this in a mock.

Be respectful. No spam.

Q: 16

You need to improve performance when ticketAPI is used to analyze the POS data. What should you do?

Options

Correct Answer:

Explanation

The most effective way to improve performance for read-intensive workloads, such as data analysis from an API, is to offload those queries from the primary database. Dynamics 365 Business Central achieves this using the read scale-out feature, which leverages a read-only replica of the Azure SQL database. Enabling read scale-out in the Business Central admin center is the fundamental step that creates this replica and makes the performance improvement possible. Once enabled, specific objects can be directed to use it.

Why Incorrect

A. Setting the ODataReadonlyGetEnabled parameter is a global setting for OData GET requests. While it can enforce read-only intent, enabling the underlying read scale-out feature is the primary requirement for performance gain.

B. The AccessByPermission property is a security setting that defines how permissions on related tables are checked. It does not relate to database load balancing or performance optimization.

D. Setting the DataAccessIntent property to ReadOnly on the API page is a necessary step to direct the API's queries to the read-only replica, but it has no effect unless read scale-out (Option C) is enabled first.

References

1. Microsoft Learn: Using Read Scale-Out for Better Performance. This document states, "To use read scale-out, you have to enable it for the environment from the Business Central admin center." It establishes enabling the feature as the prerequisite for any performance gains.

2. Microsoft Learn: DataAccessIntent Property. The official documentation for this AL property explicitly notes in the first paragraph: "To use this property, read scale-out must be enabled for the environment." This confirms that setting the property is a secondary step that depends on the feature being enabled.

3. Microsoft Learn: Managing Environments in the Admin Center - Read scale-out. This page details the administrative procedure for enabling the feature, describing it as the method to "improve performance by redirecting read-only queries away from the primary database."

Q: 17

A company has a task that is performed infrequently. Users often need to look up the procedure to complete the task. The company requires a wizard that leads users through a sequence of steps to complete the task. You need to create the page to enable the wizard creation. Which page type should you use?

Options

Correct Answer:

Explanation

The NavigatePage page type is specifically designed to create wizards in Dynamics 365 Business Central. This page type provides a structured, step-by-step user interface, typically including 'Next', 'Back', and 'Finish' buttons, which is ideal for guiding users through infrequent or complex tasks like setup procedures. It breaks down a larger task into a sequence of smaller, manageable steps, fulfilling the company's requirement for a wizard.

Why Incorrect

B. Card: A Card page is used to display and edit the details of a single record from a table, such as a specific customer or item, not for a multi-step process.

C. RoleCenter: A RoleCenter is the main dashboard or landing page for a user, providing an overview of their work and access to common tasks, not a guided wizard.

D. List: A List page displays multiple records from a table in a tabular format, allowing users to browse, sort, and filter data, but not to follow a sequential task.

References

1. Microsoft Learn. (2023). Page Types and Layouts. Dynamics 365 Business Central Documentation. Retrieved from https://learn.microsoft.com/en-us/dynamics365/business-central/dev-itpro/developer/devenv-page-types-and-layouts.

Section: Page Types: This section explicitly states, "NavigatePage: Used to create a wizard that guides a user through a series of steps for a specific task, such as a setup." It also defines the purposes of Card, List, and RoleCenter pages, confirming they are incorrect for this scenario.

2. Microsoft Learn. (2023). Designing Wizard Pages. Dynamics 365 Business Central Documentation. Retrieved from https://learn.microsoft.com/en-us/dynamics365/business-central/dev-itpro/developer/devenv-designing-wizard-pages.

Section: Wizard Page Basics: "In Business Central, a wizard is a special page type that guides users through a series of steps to complete a task... To create a wizard, you create a page and set the PageType property to NavigatePage."

Q: 18

HOTSPOT You need to define the properties of the comments field of the Non-conformity page. How should you complete the code segment? To answer, select the appropriate options in the answer area. NOTE; Each correct selection is worth one point. MB-820 question

Your Answer

Discussion

Luna P. Jul 22, 2026 11:43 am

Multiline = true, ExtendedDatatype, RichContent. Multiline=false looks like a trick option here, comments usually need multiple lines. Agree?

Ethan Jul 18, 2026 6:11 pm

Makes sense for a comments field.
Multiline = true, ExtendedDatatype, RichContent

Reese N. Jul 25, 2026 1:55 pm

Multiline = true, ExtendedDatatype, RichContent. That matches how comments fields usually get set up in Business Central labs and the official documentation. I think "RichContent" specifically brings in the rich text editor everyone expects for comments. If you want to be totally sure, I'd check official docs or run a quick hands-on in a sandbox just to confirm the behavior with these properties.

SteadyArchitect6791 Jul 24, 2026 4:25 pm

Multiline = true, ExtendedDatatype, TextRichContent. I thought TextRichContent was the right enum value for rich text in AL, not just "RichContent" by itself. Maybe I'm mixing it up with another property set though.

Mia V. Jul 8, 2026 1:35 am

Yeah, saw something like this on a practice test. Multiline = true, ExtendedDatatype, RichContent

Aaron U. Jul 24, 2026 4:39 pm

Multiline = true, ExtendedDatatype, RichContent. I've seen similar in exam practice, that's the combo for a proper comments field in Business Central.

CuriousMentor3440 Jul 17, 2026 11:27 am

Multiline = true; ExtendedDatatype; RichContent. Pretty sure Multiline=false is a trap, comments need multiple lines here.

Emma R. Jul 22, 2026 2:18 pm

Multiline = false; ExtendedDataType; TextRichContent

Be respectful. No spam.

Q: 19

DRAG DROP You need to handle the removal of the Description field and the Clone procedure without breaking other extensions. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select. MB-820 question

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Actions
Set the Description field as ObsoleteState Removed: in version 2.0.0.1.
Remove the Description field in version 2.0.0.0.
Set the Clone procedure as ObsoleteState Removed; in version 2.0.0.1.
Remove the Clone procedure in version 2.0.0.0.
Set the Clone procedure as ObsoleteState Pending and ObsoleteReason = 'Not in use in version 2.0.0.0.
Set the Description field as ObsoleteState = Pending and ObsoleteReason = "Not in use in version 2.0.0.0.
Remove the Description field from the Issue table in version 2.0.0.1.
Add the [Obsolete('xxx')] attribute to the Clone procedure in version 2.0.0.0.

Discussion

Ava P. Jul 21, 2026 10:47 pm

Description Pending, Clone Pending, then remove Description. Sequence matches what I've seen in the official docs and practice test. Good scenario to review if prepping for MB-820.

Jamie E. Jul 18, 2026 3:53 am

Description field Pending, Clone Pending, then remove Description is right. You have to warn consumers first before actually removing, per Microsoft's extension upgrade guidelines. Pretty sure this matches what they've shown in their docs, but always up for debate if anyone disagrees.

Robin W. Jul 6, 2026 8:27 pm

Set Description as Pending, Clone as Pending, then remove Description. Clone removal early is a trap for breaking extensions.

Casey J. Jul 12, 2026 4:57 am

Seen similar on practice exams. The correct order is: set Description as ObsoleteState = Pending, then set Clone procedure as Pending too, finally remove the Description field from the Issue table. Official docs and hands-on labs explain this phased removal approach well.

Ben Jul 15, 2026 4:27 am

Pretty sure the right flow is: set Description field as ObsoleteState = Pending first, then do the same for the Clone procedure, and only then actually remove Description from the Issue table. That's how you avoid breaking other extensions since consumers get a warning before things disappear. If I'm missing a reason to remove Clone before Description, let me know.

Set Description field as ObsoleteState = Pending and ObsoleteReason = "Not in use in version 2.0.0.0."
Set Clone procedure as ObsoleteState Pending and ObsoleteReason = 'Not in use in version 2.0.0.0.
Remove Description field from the Issue table in version 2.0.0.1.

RobinB Jul 13, 2026 9:37 am

Set Description as ObsoleteState = Pending, then Clone as Pending, then remove Description field last. This prevents breaking other extensions according to Microsoft's upgrade best practices. Official docs and practice tests cover this scenario, I think this is the intended sequence. Agree?

Aaron B. Jul 24, 2026 4:21 pm

Why does Microsoft make this removal process so tedious? Set Description Pending, Clone Pending, then remove Description is closest match.

Be respectful. No spam.

Q: 20

HOTSPOT A company plans to integrate tests with its build pipelines. The company has two Docket sandbox environments: SandboxA and SandboxB. You observe the following: • SandboxA is configured without the Test Toolkit installed. • SandboxB must be configured from scratch. The Test Toolkit must be installed in SandboxB during configuration. You need to configure the sandbox environments. How should you complete the cmdlets? To answer, select the appropriate options in the answer area. MB-820 question

Your Answer

Discussion

Rowan E. Jul 7, 2026 2:41 am

Nah, INCLUDETESTTOOLKIT is a trap for SandboxA. Install-TestToolkitToBcContainer is what you need for existing containers.

Alex T. Jul 6, 2026 12:18 pm

Install-TestToolkitToBcContainer for SandboxA, INCLUDETESTTOOLKIT for SandboxB

Sofia W. Jul 21, 2026 1:40 pm

Install-TestToolkitToBcContainer for SandboxA (since it's already running and just needs the toolkit added) and INCLUDETESTTOOLKIT for SandboxB, because it's being built from scratch so you want that flag during creation. Pretty sure that's the right approach, but let me know if you think otherwise.

Daniel N. Jul 18, 2026 9:48 pm

Install-TestToolkitToBcContainer for SandboxA, INCLUDETESTTOOLKIT for SandboxB. Saw similar wording in recent exam reports so pretty sure that's the config they're after.

Ava O. Jul 16, 2026 1:54 pm

Install-TestToolkitToBcContainer for SandboxA, since it's already up and just needs the toolkit. For SandboxB, you'd want to use IncludeTestToolkit because you're building it from scratch and want the toolkit as part of initial setup. Seen this pattern in a few practice dumps. Pretty sure that's what they're after but open if anyone sees it differently.

Liam S. Jul 13, 2026 9:57 am

Install-TestToolkitToBcContainer for SandboxA, INCLUDETESTTOOLKIT for SandboxB. Had something like this in a mock, pretty sure that's what fits since A exists already and B gets set up new. Correct me if I'm off here.

Ethan L. Jul 25, 2026 1:24 am

Does it mention if you need to recreate SandboxA or just update? For an existing container, I'd usually go with Install-TestToolkitToBcContainer since it just adds the toolkit. But for a new build like SandboxB, you'd use IncludeTestToolkit at creation so it's installed right away. Anyone read it differently?

MethodicalSec4237 Jul 21, 2026 12:10 am

Wait, does the question specify if "best practice" or just working config is needed? If best, option order might flip.

Liam T. Jul 22, 2026 1:08 am

Why not just use Install-TestToolkitToBcContainer for both sandboxes if you're adding the toolkit after setup?

Riley Jul 8, 2026 6:07 am

Install-TestToolkitToBcContainer for SandboxA, INCLUDETESTTOOLKIT for SandboxB. For A, it's already set up so you just add the toolkit with the cmdlet. With B, you're creating from scratch so need the include switch in your build. I'm pretty sure that's right but let me know if you see it differently.

Be respectful. No spam.

Question 1 of 20

📖 About this Domain

🎓 What You Will Learn

🛠️ Skills You Will Build

💡 Top Tips to Prepare

📖 About this Domain

🎓 What You Will Learn

🛠️ Skills You Will Build

💡 Top Tips to Prepare

📖 About this Domain

🎓 What You Will Learn

🛠️ Skills You Will Build

💡 Top Tips to Prepare

MB-820.pdf

Premium Access Includes

FLASH OFFER

avail 10% DISCOUNT on YOUR PURCHASE

Free MB-820 Practice Test Questions and Answers (2026) | Cert Empire Practice Questions

Premium Access Includes

FLASH OFFER

avail 10% DISCOUNT on YOUR PURCHASE