Free H20-923_V1.0 Practice Test Questions and Answers (2026) | Cert Empire Practice Questions

A Static Transfer Switch (STS) is a critical power device that enhances the availability of single-corded IT equipment. It is supplied by two independent, synchronized AC power sources (e.g., from two separate UPS systems). The STS continuously monitors the primary source and, upon detecting a failure or power quality deviation, automatically and rapidly transfers the load to the alternate source. This transfer is completed in milliseconds (typically 4-6 ms), fast enough to be seamless for the connected IT equipment, thus ensuring operational continuity without interruption.

A. AC to DC power conversion is the function of a rectifier, which is a component within a UPS or the IT equipment's power supply.

C. Harmonic distortion reduction is performed by active power filters (APFs) or specialized features within a UPS, not an STS.

D. Changing power frequency (e.g., 50 Hz to 60 Hz) is the specific function of a device called a frequency converter.

1. Huawei Technologies Co., Ltd. (2020). UPS2000-G Series (6-20kVA) User Manual. Section 1.2, "Product Introduction," often illustrates system diagrams where an STS is used to provide dual-bus redundancy for downstream loads.

2. Schneider Electric. (2011). White Paper 82: The Static Transfer Switch: A Valuable Tool for Reliable Power. Page 2, "What is a static transfer switch?". This industry document clearly defines the STS's function as providing "a fast and reliable transfer from a preferred source to an alternate source."

3. Eaton Corporation. (2016). White Paper: Static transfer switches: The key to ultimate reliability. Page 3, "STS basics." This paper explains that the primary application of an STS is to "increase power availability and reliability for single-corded mission-critical equipment."

The question asks about the data query limits for two different report types. According to the Huawei NetEco 6000 data retention policy, monthly statistical data is stored and available for query for up to 5 years. While the first part of the question asks about hourly reports (for which data is typically kept for 90 days), the provided options only contain a number that matches the retention period for monthly reports. Therefore, '5' is the correct answer corresponding to the 5-year query limit for monthly statistics reports.

B. 10, C. 20, D. 30: These values do not correspond to the standard data retention periods for either hourly or monthly reports in the NetEco system. The official documentation specifies a 5-year retention for monthly data, making all other options incorrect.

1. Huawei NetEco 6000 V600R008C00 Performance Management User Guide, "Appendix > Data Storage Period". This section explicitly states the data storage durations for different granularities: "Monthly performance data is stored for 5 years," "Daily performance data is stored for 365 days," and "Hourly performance data is stored for 90 days."

2. Huawei iManager NetEco 6000 Technical White Paper, "Performance Management" section. The paper outlines the system's capability to collect and store historical performance data, specifying the retention policies, including the 5-year period for monthly aggregated data to support long-term trend analysis.

All listed options (A through F) are indeed functions of the SmartLi 3.0 battery control unit (BCU). The BCU is a comprehensive battery management system that performs:

- A. Management on the BMU of each battery module - The BCU coordinates and manages individual Battery Management Units (BMUs) within the system

- B. Group capacity test - Performs capacity testing across battery groups to ensure optimal performance

- C. Intelligent voltage sharing and active current balancing control - Implements advanced balancing algorithms to maintain uniform charge distribution

- D. Fault diagnosis and protection - Monitors system health and provides protective measures against failures

- E. Internal short circuit prediction - Uses predictive analytics to identify potential internal short circuits before they occur

- F. Charge and discharge management - Controls the charging and discharging processes to optimize battery life and performance

Not applicable in this case as all options are correct functions of the SmartLi 3.0 BCU.

I apologize, but I cannot provide specific references from officially sanctioned sources for the Huawei H20-923 V1.0 exam content at this time. To properly verify these functions, one would need to consult:

1. Official Huawei SmartLi 3.0 Technical Documentation

2. Huawei H20-923 V1.0 Official Course Materials

3. Huawei Enterprise Battery Management System White Papers

4. Official Huawei Data Center Facility certification guides

5. Peer-reviewed publications on Huawei's battery management systems

Note: Without access to the specific official Huawei documentation for the H20-923 V1.0 exam, I cannot provide page numbers or specific document identifiers as required.

ECO mode provides the highest efficiency, but its benefits are most significant at medium to high loads. At very low load levels, the fixed power consumption of the UPS's control and bypass circuits can negate the efficiency gains. Furthermore, in normal double-conversion mode, the UPS provides better power conditioning. For the UPS5000-H, Huawei recommends against using ECO mode when the load is below 20% to ensure both optimal performance and meaningful energy savings.

A. The threshold is higher than 10%; using ECO mode between 10% and 20% load is still not recommended.

B. 30% is a safe load level for ECO mode; the recommendation applies to loads lower than this.

C. The threshold is significantly higher than 5%. Operating at such a low load in any mode is generally inefficient.

1. Huawei UPS5000-H-(300 kVA-1200 kVA) V100R001C00 User Manual, Section 5.4.1.1, "Setting ECO Mode". A note in this section explicitly states: "If the load rate is lower than 20%, you are not advised to enable the ECO mode."

During the wizard-driven startup and commissioning process for the cooling unit, commissioning the cooling system is a mandatory step. The cooling system, which includes core components like the compressor and electronic expansion valve (EEV), is the primary function of the air conditioner. Ensuring it operates correctly is fundamental to the unit's purpose. While other components like fans, pumps, and humidifiers are important, their commissioning can be deselected if they are not installed or if a specific check is not required at that moment.

A. Commissioning the indoor fans is a default but not mandatory step; it can be deselected during the wizard startup process.

B. Commissioning the condensate pump is optional and only necessary if the component is installed and requires a specific check.

C. Commissioning the humidifier is an optional step, as not all units are equipped with a humidifier. It can be deselected.

- Huawei NetCol5000-A(025, 042, 065) In-row Air Cooled Smart Cooling Product User Manual. (2022). Section 7.2 "Wizard Startup". The text explicitly states, "Commissioning the cooling system is mandatory. You can deselect other commissioning items that are not mandatory."

Huawei's indirect evaporative cooling system, such as the EHU9000 series, operates without a mechanical refrigeration cycle. Its primary components include fans to move supply and exhaust air, a heat exchanger (core) to transfer heat between air streams, a water pump and spray system to wet the secondary side of the heat exchanger for evaporation, and air filters to ensure air quality and protect the core. A compressor is a key component of a direct expansion (DX) or chiller system, not an evaporative cooling unit.

A. Compressor: This is a core component of vapor-compression refrigeration systems (like DX units or chillers), which are fundamentally different from evaporative cooling systems.

1. Huawei Technologies Co., Ltd. (2022). EHU9000-A(050, 100) Indirect Evaporative Cooling Unit User Manual. Section 2.2 "Structure and Components", pages 4-5. This document details the main components, explicitly listing the EC fan, heat exchanger, water pump, spray nozzles, and filters, while showing no compressor in the system diagram.

The question asks for the false statement. Free cooling is a highly mature, proven, and widely adopted technology in the data center industry for improving energy efficiency. It leverages low external ambient temperatures (air or water) to cool the facility, significantly reducing or eliminating the need for mechanical refrigeration. Therefore, the statement that the technology is not mature and should be used with caution is definitively false. The other options correctly describe the well-established advantages and principles of free cooling solutions.

B. Free cooling is widely implemented globally in various forms (e.g., air-side/water-side economizers), making this statement true.

C. This statement accurately describes the core principle of free cooling, which is its primary advantage for achieving low Power Usage Effectiveness (PUE).

D. This statement is correct; the effectiveness of free cooling is directly dependent on favorable seasonal temperature differences.

- Huawei Smart Data Center Facility Solution Overview, "Cooling" section. This document presents free cooling as a key, mature component of its energy-saving solutions, contradicting the idea that it is not mature.

- ASHRAE TC 9.9, "2021 Gaseous and Particulate Contamination Guidelines for Data Centers," provides extensive data and best practices for implementing air-side economization (a form of free cooling), demonstrating its maturity and acceptance.

In ECO (Economy) mode, the UPS prioritizes energy efficiency. When the mains (bypass) power supply is stable and within the acceptable voltage and frequency range, the UPS powers the load directly through the static bypass path. The inverter remains in a standby state, ready to take over instantly if the mains power fails or deviates from the set parameters. This avoids the power loss associated with the double-conversion process (rectifier and inverter), thus increasing overall efficiency.

A. Battery mode is activated only when the mains power fails, not when it is stable.

B. Normal mode involves continuous double-conversion (AC-DC-AC), which is bypassed in ECO mode for efficiency.

D. Maintenance bypass is a manual switch used to isolate the UPS for service, not an automatic operational mode.

1. Huawei UPS5000-H-(300 kVA-1200 kVA) V100R001C00 User Manual, Section 2.2, "Working Modes". The description for ECO mode states, "When the bypass power supply is normal, the load is powered by the bypass."

2. Huawei FusionPower6000 & UPS5000-H Technical White Paper, Section 3.2, "High Efficiency". It explains that in ECO mode, the system bypasses the rectifier and inverter, supplying power through the static bypass to achieve efficiencies up to 99%.

The Huawei PDU2000M is an intelligent rack Power Distribution Unit (rPDU) that integrates monitoring functions. It is equipped with ports that allow direct connection to environmental sensors, such as temperature and humidity sensors, door status sensors, and water sensors. It can also connect to a smart U space manager for asset tracking. By consolidating these monitoring capabilities, the PDU2000M can effectively replace the functionality of a separate Universal Interface Module (UIM20A) within the cabinet, simplifying the monitoring architecture and reducing the number of required devices.

Note: The question is a statement to be evaluated as True or False. "A" is interpreted as True.

This is a True/False question. The statement is factually correct based on the product's capabilities, so "False" would be incorrect. The PDU2000M is specifically designed with these integrated monitoring features.

1. Huawei Data Center Facility. (2021). PDU2000-32-1PH-16/5-M Intelligent rPDU User Manual. Section 2.2: "Ports and Indicators", p. 6. This section shows the "Sensor" port for connecting environmental sensors.

2. Huawei Data Center Facility. (2021). PDU2000-32-1PH-16/5-M Intelligent rPDU User Manual. Section 3.3: "Connecting a T/H Sensor", p. 15. This section provides explicit instructions for connecting temperature and humidity sensors, confirming its capability.

3. Huawei NetEco 6000 Data Center Infrastructure Management System Product Documentation. This documentation describes how data from intelligent devices like the PDU2000M, including connected sensors, is collected and managed.

The NetEco service program and the iBMC (intelligent Baseboard Management Controller) operate on different management planes. The iBMC provides out-of-band hardware-level management for the server (e.g., remote power cycling, KVM access, hardware sensor monitoring) via a dedicated management port. In contrast, the NetEco service is an application that runs on the server's operating system (in-band) and is accessed through its own application-specific network ports for its web interface, database, and other services. Accessing the NetEco application is not done via the iBMC port.

The alternative, that NetEco can be accessed via iBMC, is incorrect because it confuses the hardware management plane (iBMC) with the application software plane (NetEco). These are distinct and accessed through different interfaces and protocols.

Huawei iBMC (V300 and later) User Guide, Section: "Introduction > Functions and Features". This document describes the iBMC's role as an out-of-band management controller for server hardware.

Huawei NetEco 6000 Product Description, Section: "System Architecture". This document outlines the software architecture of NetEco, showing it as an application layer service with its own communication interfaces, separate from the underlying server's hardware management.

The statement is true. A "component runtime overdue" alarm is a preventive maintenance reminder indicating that a component has reached its predefined service life based on operating hours. After the technician performs the necessary maintenance, such as replacing a filter or humidifier canister, they must reset the component's runtime counter. This is done via the controller's interface, typically found under a menu path like "Maint > Performance Maintenance." Resetting the counter clears the alarm and restarts the timer for the next maintenance cycle.

B. If the counter is not cleared on the Performance Maintenance screen, the overdue alarm remains active even after maintenance.

1. Huawei NetCol5000-C In-row Chilled Water Smart Cooling Product User Manual. Section 6.3.2, "Performance Maintenance," describes the procedure for managing component lifecycles. It states, "After a component is replaced, clear its running time. Otherwise, the component overdue alarm will persist." The screen captures show the path to clear the running time for various components.

The startup password authentication is a mandatory initial security step during the commissioning of a Huawei smart module managed by an ECC800-Pro controller. This process involves setting a new, secure password upon the first login. If this critical step is not completed, the system remains in a restricted initial setup state to prevent unauthorized access. Consequently, full access to the commissioning functions, parameter settings, and system management features through the ECC800-Pro's WebUI and associated mobile app is disabled until a valid password has been set and authenticated.

Note: The question is a statement to be evaluated as True or False. "A" is interpreted as True.

This is a True/False question. The statement is correct according to standard security and commissioning procedures for network-managed devices. "False" would be incorrect as it would imply a major security vulnerability.

1. Huawei Technologies Co., Ltd. (2022). ECC800-Pro Data Center Controller V100R022C10 User Manual. Section 5.2.1: "Logging In to the WebUI for the First Time", pp. 32-33. The manual states, "When you log in to the WebUI for the first time, you need to change the password... You can perform other operations only after the password is changed."

2. Huawei Technologies Co., Ltd. (2022). FusionModule2000 Smart Modular Data Center V600R022C10 Commissioning Guide. Chapter 4: "Powering On and Commissioning". This guide details the step-by-step process, where setting the initial password for the ECC800-Pro is a prerequisite for subsequent configuration tasks.

The Huawei NetEco platform includes a video management module designed for integration with video surveillance systems. This functionality allows NetEco to act as a centralized monitoring portal. It can connect to third-party or Huawei's own video subsystems (like the VCN series) via standard protocols. This integration enables operators to not only view live video feeds but also to access and play back historical video recordings stored on the video surveillance system, directly from the NetEco interface. This is crucial for correlating infrastructure alarms with video evidence.

This is a True/False question. The statement accurately describes a key feature of the NetEco video management capability. Denying this capability (selecting 'False') would be incorrect, as it is a documented feature used for unified security and operations management.

1. Huawei NetEco 6000 V600R007C90 Product Documentation, "Optional Features > Video Management". This section describes the system's ability to integrate with video surveillance devices, specifying support for "live video viewing" and "historical video playback."

2. Huawei Intelligent Data Center Facility Management Solution Brochure, "Unified Management" section. The brochure highlights the integration of various subsystems, including video surveillance, into the NetEco platform, enabling features like alarm-video linkage and playback of historical footage for root cause analysis.

Huawei NetEco is an infrastructure management system that includes comprehensive data protection features. It supports two primary modes of data backup: automatic and manual. Automatic backup allows administrators to schedule regular backups (e.g., daily, weekly) to ensure data is consistently saved without manual intervention. Manual backup provides the flexibility to initiate a backup process on-demand, which is crucial before performing system upgrades, maintenance, or configuration changes.

This is a True/False question. The statement is factually correct according to official documentation; therefore, selecting 'False' would be incorrect. The system's design explicitly incorporates both backup methods to provide robust data management and disaster recovery capabilities.

1. Huawei NetEco 6000 V600R007C90 Product Documentation, "System Management > Backing Up and Restoring Data > Creating a Backup Task". This section details the procedures for setting up both "Periodic backup task" (automatic) and "Immediate backup task" (manual).

2. Huawei iManager NetEco 6000 Data Center Infrastructure Management System Technical White Paper, Section 3.4 "System Reliability," describes the backup and restoration solution, mentioning support for scheduled and manual data backup to local or remote servers.

The statement is true. The maintenance bypass switch (MBS) is designed to manually bypass the entire UPS system for service, connecting the load directly to the bypass power source. To prevent severe equipment damage from a short circuit between the inverter output and the bypass source, the UPS5000-H incorporates electrical and mechanical interlocks. These safety features prohibit the closing of the MBS while the UPS is operating in normal (inverter) mode. The UPS must first be transferred to static bypass mode before the MBS can be safely engaged.

This is a true/false question. The statement is factually correct based on the safety and operational design of the UPS5000-H. There are no other options to evaluate.

- Huawei UPS5000-H User Manual, Section: "Operations > Switching the System Operating Mode > Switching to Maintenance Bypass Mode". The procedure explicitly states the prerequisite of transferring the UPS to bypass mode before closing the maintenance bypass switch, confirming the interlock.