Free MB-335 Practice Test Questions and Answers (2026) | Cert Empire

Free preview: 20 questions.

MB-335.pdf

Q: 1

A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB. ProductA is the primary ingredient. You use Products to adjust the concentration of active ingredients in the lotion. ProductC represents the remainder. You need to ensure that the lotion final product has a consistent concentration of anti-inflammatory agents. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

Options

Q: 2

Note. This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing. The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. IngredientA is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient You need to ensure that the system is set up to support the manufacturing process. Solution: Configure the catch weight of IngredientA to allow for the variances of the concentrations received from the different vendors. Does the solution meet the goal?

Options

Q: 3

HOTSPOT A manufacturer uses Dynamics 365 Supply Chain Management to create bicycle parts as a configure- to-order configuration. All bicycle parts are sourced from external sources and assembled in the manufacturing facility. The manufacturer plans to expand its capabilities to create custom bicycles parts in an engineer-to- order model. All bicycle parts will be created in the manufacturing facility. The custom bicycle parts must be omitted from any master planning process. You need to describe the concepts for the requirements. Which concepts should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. MB-335 question

Your Answer

Q: 4

You need to configure the system to track the cost and delivery performance of VendorZ. Which two actions should you perform? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

Options

Q: 5

HOTSPOT You need to configure scheduling for each production area. Which scheduling options should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point. MB-335 question

Your Answer

Q: 6

A company has a Dynamics 365 Supply Chain Management implementation. The company plans a promotional sales campaign that targets top customers. The sales campaign will guarantee that orders are delivered within a specific two-week period. The system configuration must prioritize a group of similar production orders so they can be scheduled at the same time. You need to configure the system. What should you create?

Options

Q: 7

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to It. As a result, these questions will not appear in the review screen. A manufacturing company has a new speaker that is available with standard and premium carbon fiber options. For the premium option, speakers are made to order. Customers can choose from seven product attributes at different prices. You need to create and configure the product and pricing for the new speaker. Solution: Create a constraint-based product with configurations. Use a price model to calculate the different configurable option costs. Docs the solution meet the goal?

Options

Correct Answer:

Explanation

The solution meets the goal. Here is the explanation:

To create and configure the product and pricing for the new speaker, you should use the following

steps1:

Create a product master for the speaker and release it to the relevant legal entities. On the Product

dimension groups page, select Constraint-based configuration as the configuration technology, and

select the configuration dimension. On the Released product details page, select Configurable on the

Engineer tab.

Create a constraint-based product configuration model for the speaker and add it as a version to the

product master. On the Constraint-based product configuration model details page, add attributes,

constraints, subcomponents, BOM lines, and route operations to define the features and structure of

the speaker. For example, you can add an attribute for carbon fiber options and specify Standard and

Premium as the values. You can also add constraints to limit the combinations of attribute values that

are allowed.

Create a price model for the speaker and link it to the product configuration model. On the Price

models page, add price components and specify how they are calculated based on attributes,

subcomponents, BOM lines, or route operations. For example, you can add a price component for

carbon fiber options and specify different prices for Standard and Premium values. You can also add

price components for other attributes that affect the price of the speaker.

Configure products on sales orders, sales quotations, purchase orders, or production orders by using

the Product configuration models page. You can select values for attributes and see how they affect

the price of the speaker. You can also view the price details and see how each price component

contributes to the total price.

1: Product configuration overview : Create constraint-based configuration : Price models

Q: 8

A manufacturing company uses time and attendance in Dynamics 365 Supply Chain Management. The company requires that employees register time against each machine on the shop floor. You need to configure the system so that employees can register time. Which two configurations must be set up? Each answer represents a partial solution NOTE Each correct selection is worth one point.

Options

Q: 9

A manufacturing company is implementing the service management features for Dynamics 365 Supply Chain Management. The company has two legal entities: one for manufacturing and one for servicing and repairs. The company manufactures a group of inventoried items for serialized devices at a single manufacturing location. The items are used to service devices at a single servicing location. The company has customers who must make an appointment at the servicing location at least once a year to have their devices inspected and serviced. You need to configure a service object for this scenario. What should you configure as a service object?

Options

Q: 10

DRAG DROP

A manufacturer sends wiring harnesses to a vendor to be soldered to a connector. You create the subcontracting process in the bill of materials (BOM) and route to account for the items sent to the vendor.

You need to set up a new item model group for the service item.

Which three actions should you perform? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Assign the item model group to the service item and select the stocked product option.
Create a new item model group and clear the stocked product option.
Add the service item to the BOM.
Add the service item and set the new inventory model group in the BOM to FIFO.
Create a new item model group and select the stocked product option.

Q: 11

DRAG DROP

A company uses the asset management module in Dynamics 365 Supply Chain Management. A machine on the shop floor is noisy and emitting and odd smell. The shop floor manager must alert the repair team that the asset might require a repair, or a series of repairs, by one or more specialized repair technicians. All repair records must tie back to the initial investigation records in case of a safety audit.

You need to create components to initiate the process of tracking the requests. Which three actions should you perform in sequence? To answer. More the appropriate actions from the list of actions to the answer to the answer area and arrange them in the correct order.

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Create the work order lifecycle states.
Configure work order types.
Configure the work order lifecycle models.
Configure maintenance request types.
Create the maintenance request lifecycle states.
Configure a maintenance request model.

Q: 12

DRAG DROP

A process manufacturing company is implementing Dynamics 365 Supply Chain Management. The company will use multiple process manufacturing functionalities including by-products.

You need to configure by-product formula allocation methods.

Which methods should you use? To answer, drag the appropriate by-product burden allocation methods to the correct scenarios. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

NOTE: Each correct selection is worth one point

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

percent
recycled
none
per quantity

Q: 13

DRAG DROP A company uses Asset management in Dynamics 365 Supply Cham Management. The company also uses Dynamics 365 Guides independently of the Dynamics 365 Supply Chain Management implementation. Maintenance workers requite a checklist template to complete work orders. A solution must help the workers through work order steps. The solution must use Dynamics 365 Guides with Dynamics 365 Supply Chain Management. You need to integrate the solution. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Use document management to attach a link to the guide on the maintenance checklist template record.
Complete all prerequisites for the Dynamics 365 Remote Assist configuration.
Create a guide of the maintenance checklist process in Dynamics 365 Supply Chain Management by using the task recorder.
Create a record template for a work order in Dynamics 365 Supply Chain Management
Assign a task recording link to a step in the guide in the Dynamics 365 Guides PC app.
Create a maintenance checklist template in Dynamics 365 Supply Chain Management.
Create a guide of the maintenance checklist process in the Dynamics 365 Guides PC app.
Assign a guide to the template field on the maintenance checklist template record.

Q: 14

DRAG DROP You are the product definition manager for a car manufacturing company. You set up and maintain the production configuration models used at the company. You must build a new configuration model and Include Constraints in the model. You need to determine winch constraint type to use tor each scenario. Which constraint type should you use? To answer, drag the appropriate constraint types to the correct scenarios. Each constraint type may be used once, more than once, or not at all You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

expression
table

Q: 15

DRAG DROP A glass bottle manufacturer uses route operations to schedule resources and track manufacturing costs. The company has recently seen an increase in demand and purchases another resource that costs more to run. The company uses the same costs per resource. The company must be able to track cost contributions for the new resource. You need to create a cost category for the new resource. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. NOTE: More than one order of answer choices is correct You will receive credit for any of the correct orders you select.

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Assign the cost group for the indirect cost to the route operation.
Update the cost price on the existing cost categories.
Assign the surcharge node to the resource.
Create a new cost group.
Create a new cost category.
Assign the cost category to all route operations that use the new resource.

Q: 16

DRAG DROP

A skateboard manufacturer uses route operations to schedule resources and estimate units per hour. All products use the same sub assembly item and resource sanding process.

You observe an increase in the number of units a sanding belt resource can produce. The production schedule is now inaccurate due to the number of units the sanding belt line can produce. You must make a permanent change to the number of units the resource can produce for all future orders.

You need to adjust the process quantity on the route operation.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Apply the new template to the resource's calendar.
Create a new working time template.
Select times on the operation that use the resource.
In the Process qty. field, update the quantity.
In the engineering tab of the subassembly item, select route.
Select the calendar related to the resource.

Q: 17

DRAG DROP You need to configure the solution for the two issues the production manager reported. How should you complete the configurations? To answer, move the appropriate configurations to the correct issues. You may use each configuration once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Assign a maintenance worker.
Assign a capability to a resource.
Create a working calendar.
Define the capability priority.

Q: 18

HOTSPOT A company sells chemicals that require special instructions for disposal and remediation due to toxicity regulatory requirements. The company requires that when a sales order's packing slip is printed for a product that contains a toxic chemical, the instructions must also be printed for inclusion in the shipment. You need to configure the system to meet the requirements. Which configurations should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. MB-335 question

Your Answer

Q: 19

HOTSPOT

A company that assembles packaging material uses Dynamics 365 Supply Chain Management.

The glue that is used in assembly has run out of stock and will not be back in stock as expected. Another adhesive must be substituted for the glue. This will affect orders in planning as well as production orders that have started.

You need to ensure that the substitute adhesive is used in production until the glue is back in stock.

Which configuration should you use for each requirement? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Your Answer

Q: 20

HOTSPOT You are the production scheduler for a manufacturing company. You have run the Resource Group Capacity report as shown in the Resource Group 21 Capacity exhibit. (Click the Resource Group 21 Capacity tab).

After reviewing that report, you run Resource Capacity reports as shown in the Resource 2101 and 2102 Capacity exhibits. (Click the 2101 Capacity and 2102 Capacity tabs.)

You run the Gantt chart report as shown in the Gantt exhibit to determine the production orders scheduled on the resources. (Click the Gantt tab.)

You need to determine the method to schedule the production lines.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

Your Answer

Question 1 of 20

MB-335.pdf

Premium Access Includes

FLASH OFFER

avail 10% DISCOUNT on YOUR PURCHASE

Free MB-335 Practice Test Questions and Answers (2026) | Cert Empire Practice Questions

Premium Access Includes

FLASH OFFER

avail 10% DISCOUNT on YOUR PURCHASE