Free CLSSYB-001 Practice Test Questions and Answers (2026) | Cert Empire Practice Questions

Get CLSSYB-001 Exam Questions

Free preview: 20 questions.

Already purchased? Log in

GAQM CLSSYB 001

View Mode
Q: 1
Benefits and working conditions would be primarily the concern of which of the following?
Options
Q: 2
The Control Plan is the road map to sustaining the improvements made through the Lean Six Sigma project and should therefore involve keeping the __________ up to date as a means of supporting the Response Plan.
Options
Q: 3
If a set of data is generally centered relative to the targeted value but is rather widely disbursed it would be said to be _____________.
Options
Q: 4
Which of the following would likely not be a CTQ (Critical-to-Quality) for the purchase of a product?
Options
Q: 5
In the expression Y = f(Xn) Y, the output, is the ___________ variable and Xn, the inputs, are the __________ variables.
Options
Q: 6
When we create a Process Map we use a __________ to show the direction of work flow.
Options
Q: 7
An important factor in a viable Control Plan is to determine who, when and to what level various personnel must be _________ to maintain the improvements made to a process.
Options
Q: 8
Al bought a handheld GPS from his local electronics store. When he entered an address it would not function. For the manufacturer of the GPS this would be categorized as what type of cost?
Options
Q: 9
Measurement System Analysis is a procedure used to quantify variation of the method or system used for taking measurements and used to assure usable data is collected.
Options
Q: 10
One of the primary objectives of constructing an X-Y Diagram is to separate the vital few X’s from the trivial many X’s.
Options
Q: 11
A Belt has determined that the insurance claim form needn’t be reviewed by accounting thereby improving the number of claims a processer can handle. According to Cost of Poor Quality (COPQ) definitions RTY improvement would be considered _______________.
Options
Q: 12
With a Fishbone Diagram we use the legs to define each source of a potential defect and along the legs we enter each potential means by which a defect could be introduced into our process.
Options
Q: 13
Six Sigma refers to a process whose output has 100% of its data points within 8 Standard Deviations from the Mean.
Options
Q: 14
Voice of the Business is a Lean Six Sigma technique to determine the needs and wants of the ______________ of the business.
Options
Q: 15
To reduce the people or operator introduced defects into a process it is best if a Belt can design and implement a means of ________________ into the process.
Options
Q: 16
One of the primary deliverables from performing a SIPOC is to begin to understand which inputs have the greatest affect on the ____________ most valued outputs.
Options
Q: 17
Y, the output of a process, is the ______________ variable while Xn, the various inputs to a process, are the _____________ variables.
Options
Q: 18
A tool we use to identify possible failures (defects) in our process and the impact they may have is the _________________.
Options
Q: 19
SIPOC stands for Suppliers, Inputs, ___________ , Output and Customers.
Options
Q: 20
The Pareto Chart is a tool that displays data that typically follows what ratio?
Options
Question 1 of 20

Premium Access Includes

  • ✓Quiz Simulator
  • ✓Exam Mode
  • ✓Progress Tracking
  • ✓Question Saving
  • ✓Flash Cards
  • ✓Drag & Drops
  • ✓3 Months Access
  • ✓PDF Downloads
Get Premium Access
Scroll to Top

FLASH OFFER

Days
Hours
Minutes
Seconds

avail 10% DISCOUNT on YOUR PURCHASE

  • USE THE CODE GIVEN BELOW ON YOUR CHECKOUT
DISCOUNT10