Refer to the exhibit, which shows the output of get router info bgp summary. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/FCSS_NST_SE-7.4_Dumps/page_9_img_1.jpg? Which two statements are true? (Choose two.)

The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.

The local FortiGate has received 18 packets from a BGP neighbor.

The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.

The TCP connection with BGP neighbor 100.64.2.254 was successful.

The local FortiGate has received 18 packets from a BGP neighbor.

The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264

Refer to the exhibit, which shows the output of a debug command. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/FCSS_NST_SE-7.4_Dumps/page_7_img_1.jpg? Which two statements about the output are true? (Choose two.)

The interlace is part of the OSPF backbone area.

In the network connected to port4, two OSPF routers are down.

The interlace is part of the OSPF backbone area.

There are a total of five OSPF routers attached to the vorz4 network segment

One of the neighbors has a router ID of 0.0.0.4.

In the network connected to port4, two OSPF routers are down.

Exhibit. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/FCSS_NST_SE-7.4_Dumps/page_14_img_1.jpg? Refer to the exhibit, which shows a partial output of diagnose hardware aysinfo memory. Which two statements about the output are true? (Choose two.)

There are 98908 kB o! memory that will never be used.

The value indicated next to the inactive heading represents the currently unused cache page.

There are 98908 kB o! memory that will never be used.

The user space has 708880 kB of physical memory that is not used by the system.

The I/O cache, which has 641364 kB of memory allocated to it.

The value indicated next to the inactive heading represents the currently unused cache page.

Exhibit. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/FCSS_NST_SE-7.4_Dumps/page_15_img_1.jpg? Refer to the exhibit, which shows the output of get system ha status. NGFW-1 and NGFW-2 have been up for a week. Which two statements about the output are true? (Choose two.)

If port 7 becomes disconnected on the secondary, both FortiGate devices will elect itself as primary.

If FGVM...649 is rebooted. FGVM...650 will become the primary and retain that role, even after FGVM...649 rejoins the cluster.

If a configuration change is made to the primary FortiGate at this time, the secondary will initiate a synchronization reset.

If port 7 becomes disconnected on the secondary, both FortiGate devices will elect itself as primary.

If FGVM...649 is rebooted. FGVM...650 will become the primary and retain that role, even after FGVM...649 rejoins the cluster.

If no action is taken, the primary FortiGate will leave the cluster because of the current sync status.

Refer to the exhibit, which shows the output of diagnose sys session list. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/FCSS_NST_SE-7.4_Dumps/page_32_img_1.jpg? If the HA ID for the primary device is 0, what happens if the primary fails and the secondary becomes the primary?

Traffic for this session continues to be permitted on the new primary device after failover, without requiring the client to restart the session with the server.

The secondary device has this session synchronized; however, because application control is applied, the session is marked dirty and has to be re-evaluated after failover.

Traffic for this session continues to be permitted on the new primary device after failover, without requiring the client to restart the session with the server.

The session will be removed from the session table of the secondary device because of the presence of allowed error packets, which will force the client to restart the session with the server.

The session state is preserved but the kernel will need to re-evaluate the session because NAT was applied.

Refer to the exhibit, which shows the output of the command get router info bgp neighbors 100.64.2.254 advertised-routes. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/FCSS_NST_SE-7.4_Dumps/page_35_img_2.jpg? What can you conclude from the output?

The local router is advertising the 10.20.30.40/24 network to its BGP neighbor.

The BGP state of the two BGP participants is OpenConfirm.

The router ID of the neighbor is 100.64.2.254.

The BGP neighbor is advertising the 10.20.30.40/24 network to the local router.

The local router is advertising the 10.20.30.40/24 network to its BGP neighbor.

Refer to the exhibit, which shows partial outputs from two routing debug commands. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/FCSS_NST_SE-7.4_Dumps/page_19_img_1.jpg? Which change must an administrator make on FortiGate to route web traffic from internal users to the internet, using ECMP?

Set the priority of the static default route using port1 to 10.

Set snat-route-change to enable.

Set the priority of the static default route using port2 to 1.

Set preserve-session-route to enable.

Set the priority of the static default route using port1 to 10.

Free FCSS_NST_SE-7-4 Practice Test Questions and Answers (2026)

Q: 1

Refer to the exhibit, which shows the output of get router info bgp summary.

? Which two statements are true? (Choose two.)

Options

Q: 2

Exhibit.

? Refer to the exhibit, which shows a FortiGate configuration. An administrator is troubleshooting a web filter issue on FortiGate. The administrator has configured a web filter profile and applied it to a policy; however the web filter is not inspecting any traffic that is passing through the policy. What must the administrator do to fix the issue?

Options

Q: 3

Which authentication option can you not configure under config user radius on FortiOS?

Options

Q: 4

Refer to the exhibit showing a debug output.

? An administrator deployed FSSO in DC Agent Mode but FSSO is failing on FortiGate. Pinging FortiGate from where the collector agent is deployed is successful. The administrator then produces the debug output shown in the exhibit. What could be causing this error message?

Options

Q: 5

Refer to the exhibit, which a network topology and a partial routing table.

? FortiGate has already been configured with a firewall policy that allows all ICMP traffic to flow from port1 to port3. Which changes must the administrator perform to ensure the server at 10.4.0.1/24 receives the echo reply from the laptop at 10.1.0.1/24?

Options

Q: 6

Refer to the exhibit, which shows the output of a debug command.

? Which two statements about the output are true? (Choose two.)

Options

Q: 7

Exhibit.

? Refer to the exhibit, which shows a partial output of diagnose hardware aysinfo memory. Which two statements about the output are true? (Choose two.)

Options

Q: 8

During which phase of IKEv2 does the Diffie-Helman key exchange take place?

Options

Q: 9

Exhibit. ? Refer to the exhibit, which shows the output of get system ha status. NGFW-1 and NGFW-2 have been up for a week. Which two statements about the output are true? (Choose two.)

Options

Q: 10

Refer to the exhibit, which shows the output of diagnose sys session list. ? If the HA ID for the primary device is 0, what happens if the primary fails and the secondary becomes the primary?

Options

Q: 11

Which statement about protocol options is true?

Options

Q: 12

Which two statements about conserve mode are true? (Choose two.)

Options

Q: 13

Consider the scenario where the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate. Which action will FortiGate take when using the default settings for SSL certificate inspection?

Options

Q: 14

Refer to the exhibit, which shows the output of the command get router info bgp neighbors 100.64.2.254 advertised-routes.

? What can you conclude from the output?

Options

Q: 15

Refer to the exhibit, which shows partial outputs from two routing debug commands.

? Which change must an administrator make on FortiGate to route web traffic from internal users to the internet, using ECMP?

Options

Question 1 of 20

Free FCSS_NST_SE-7-4 Practice Test Questions and Answers (2026)

Premium Access Includes

FLASH OFFER

avail 10% DISCOUNT on YOUR PURCHASE