A second set of traffic selectors is negotiated between two peers using IKEv2. Which IKEv2 packet will contain details of the exchange?

On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, which command is needed for the hub to be able to terminate FlexVPN tunnels?

Which statement about GETVPN is true?

Which method dynamically installs the network routes for remote tunnel endpoints?

Which two parameters help to map a VPN session to a tunnel group without using the tunnel-group list? (Choose two.)

Refer to the exhibit. A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the syslog message, which action brings up the VPN tunnel?

Refer to the exhibit. Which two tunnel types produce the show crypto ipsec sa output seen in the exhibit? (Choose two.)

Which command identifies a Cisco AnyConnect profile that was uploaded to the flash of an IOS router?

Refer to the exhibit. Which value must be configured in the User Group field when the Cisco AnyConnect Profile is created to connect to an ASA headend with
IPsec as the primary protocol?

Which configuration construct must be used in a FlexVPN tunnel?

Which two types of web resources or protocols are enabled by default on the Cisco ASA Clientless SSL VPN portal? (Choose two.)

Refer to the exhibit. What is configured as a result of this command set?

Refer to the exhibit. Based on the exhibit, why are users unable to access CCNP Webserver bookmark?

A Cisco AnyConnect client establishes a SSL VPN connection with an ASA at the corporate office. An engineer must ensure that the client computer meets the enterprise security policy. Which feature can update the client to meet an enterprise security policy?

Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?

Cisco AnyConnect Secure Mobility Client has been configured to use IKEv2 for one group of users and SSL for another group. When the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect. What might be the problem?

Which two features provide headend resiliency for Cisco AnyConnect clients? (Choose two.)

Refer to the exhibit. Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)

Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?

Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?

Which command is used to troubleshoot an IPv6 FlexVPN spoke-to-hub connectivity failure?

Refer to the exhibit. An engineer is troubleshooting a new GRE over IPsec tunnel. The tunnel is established, but the engineer cannot ping from spoke 1 to spoke
2. Which type of traffic is being blocked?

Refer to the exhibit. Which VPN technology is allowed for users connecting to the Employee tunnel group?

Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?

Refer to the exhibit. Based on the debug output, which type of mismatch is preventing the VPN from coming up?

Refer to the exhibit. A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?

In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do not form. Which troubleshooting step solves the issue?

An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of
"MM_NO_STATE." Why does this failure occur?

Refer to the exhibit. The customer can establish a Cisco AnyConnect connection without using an XML profile. When the host "ikev2" is selected in the
AnyConnect drop down, the connection fails. What is the cause of this issue?

Refer to the exhibit. An SSL client is connecting to an ASA headend. The session fails with the message `Connection attempt has timed out. Please verify Internet connectivity.` Based on how the packet is processed, which phase is causing the failure?

Refer to the exhibit. Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA. Which command on the ASA is missing?

Refer to the exhibit. What is a result of this configuration?

Refer to the exhibit. Which type of mismatch is causing the problem with the IPsec VPN tunnel?

Refer to the exhibit. The IKEv2 site-to-site VPN tunnel between two routers is down. Based on the debug output, which type of mismatch is the problem?

Which two remote access VPN solutions support SSL? (Choose two.)

What uses an Elliptic Curve key exchange algorithm?

What are two functions of ECDH and ECDSA? (Choose two.)

Which technology works with IPsec stateful failover?

Which redundancy protocol must be implemented for IPsec stateless failover to work?

Which VPN solution uses TBAR?

Refer to the exhibit. Which VPN technology is used in the exhibit?

Cisco AnyConnect clients need to transfer large files over the VPN sessions. Which protocol provides the best throughput?

Which two commands help determine why the NHRP registration process is not being completed even after the IPsec tunnel is up? (Choose two.)

Refer to the exhibit. All internal clients behind the ASA are port address translated to the public outside interface that has an IP address of 3.3.3.3. Client 1 and client 2 have established successful SSL VPN connections to the ASA. What must be implemented so that "3.3.3.3" is returned from a browser search on the IP address?

Which VPN does VPN load balancing on the ASA support?

Which parameter must match on all routers in a DMVPN Phase 3 cloud?

Which parameter is initially used to elect the primary key server from a group of key servers?

Which benefit of FlexVPN is a limitation of DMVPN using IKEv1?

A Cisco ASA is configured in active/standby mode. What is needed to ensure that Cisco AnyConnect users can connect after a failover event?

Which two changes must be made in order to migrate from DMVPN Phase 2 to Phase 3 when EIGRP is configured? (Choose two.)

Which two protocols does DMVPN leverage to build dynamic VPNs to multiple destinations? (Choose two.)

Refer to the exhibit.

Based on the configuration output, what is the VPN technology?

Which technology and VPN component allows a VPN headend to dynamically learn post NAT IP addresses of remote routers at different sites?

router is being configured for IKEv2 AnyConnect using AnyConnect-EAP. How would the administrator separate profiles for administrators and employees so that authorization differs when they connect?

What is a characteristic of GETVPN?