Free CWNA-108 Practice Test Questions and Answers (2026) | Cert Empire Practice Questions

Free preview: 20 questions.

Already purchased? Log in

CWNP CWNA 108

View Mode
Q: 1
An RF signal sometimes bends as it passes through some material other than free space. What is the term that describes this behavior?
Options
Q: 2
You are reconfiguring an AP to use the short guard interval. How long will the new guard interval duration be after the change?
Options
Q: 3
You are deploying a WLAN with the access points configured for 10 mW of output power on the 2.4 GHz radios and 20 mW of output power on the 5GHz radios. Some semi-directional antennas are also in use. What kind of deployment is described?
Options
Q: 4
You have been tasked with creating a wireless link between two buildings on a single campus. The link must support at least 150 Mbps data rates. What kind of WLAN technology role should you deploy?
Options
Q: 5
What primary metric of scanning can stations use to select the best AP for connectivity to the desired BSS?
Options
Q: 6
To ease user complexity, your company has implemented a single SSID for all employees. However, the network administrator needs a way to control the network resources that can be accessed by each employee based in their department. What WLAN feature would allow the network administrator to accomplish this task?
Options
Q: 7
In a long-distance RF link, what statement about Fade Margin is true?
Options
Q: 8
When a client station sends a broadcast probe request frame with a wildcard SSID, how do APs respond?
Options
Q: 9
An IEEE 802.11 amendment is in the daft state. What impact does this draft amendment have on the 802.11 standard?
Options
Q: 10
During a post-implementation survey, you have detected a non-802.11 wireless device transmitting in the area used by handheld 802.11g scanners. What is the most important factor in determining the impact of this non-802.11 device?
Options
Q: 11
Your manager asked you to locate a solution that allows for centralized monitoring of WLAN performance over time. He wants a single pane of glass for administration and monitoring of the solution. What do you recommend?
Options
Q: 12
The requirements for a WLAN you are installing state that it must support unidirectional delays of less than 150 ms and the signal strength at all receivers can be no lower than -67 dBm. What application is likely used that demands these requirements?
Options
Q: 13
Which IEEE 802.11 physical layer (PHY) specification includes support for and compatibility with both ERP and HR/DSSS?
Options
Q: 14
A dual-band 802.11ac AP must be powered by PoE. As a class 4 device, what power level should be received at the AP?
Options
Q: 15
You are troubleshooting a client problem with a 2.4 GHz WLAN connection. The client is experiencing surprisingly low data rates during the work day. You analyze the workspace outside of business hours and detect a strong signal with a typical noise floor at the client location. During working hours, the user works with a laptop in the area and uses an external USB hard drive for continuous data access. The user also states that the laptop works as expected on her home network. The user working approximately 8 feet away from this client experiences no problems. Based on this information, what is the likely cause of the problem?
Options
Question 1 of 20

Premium Access Includes

  • Quiz Simulator
  • Exam Mode
  • Progress Tracking
  • Question Saving
  • Flash Cards
  • Drag & Drops
  • 3 Months Access
  • PDF Downloads
Get Premium Access
Scroll to Top

FLASH OFFER

Days
Hours
Minutes
Seconds

avail 10% DISCOUNT on YOUR PURCHASE