A business requirement defines the goals and objectives of the business, focusing on the "what" and "why" of a project. "Improving the performance of an application to make users happy" is a classic business requirement as it describes a desired business outcome—enhanced user satisfaction and productivity—which directly impacts business success. This goal is technology-agnostic. Technical requirements, in contrast, specify "how" to achieve these business goals through specific technologies, configurations, and metrics.

A. REST API integration is a specific technical implementation choice that defines how software components or systems will communicate.

B. Using Aruba Central is a technical solution; it specifies a particular product to fulfill a technical need for centralized management.

D. An oversubscription ratio is a detailed technical design metric used by network engineers to balance network performance against cost.

1. Aruba Networks (an HPE Company). (2021). Aruba Data Center Networking Solution Guide.

Section: Chapter 2

"Planning and design

" Page 10.

Content: The guide explicitly lists "Improve application performance and availability" as a primary example of a business requirement that drives data center design. It distinguishes these from technical requirements like scalability

high availability

and automation

which are methods to achieve business goals.

2. Oppenheimer

P. (2011). Top-Down Network Design (3rd ed.). Cisco Press.

Section: Chapter 1

"Analyzing Business Goals and Constraints

" Pages 7-9.

Content: This foundational network design text emphasizes that the design process must start with business goals

such as "improving customer satisfaction" or "increasing employee productivity." Technical requirements

like specific network topologies

protocols (e.g.

API usage)

or performance metrics (e.g.

oversubscription)

are derived from these high-level business objectives.

3. Purdue University. (n.d.). Systems Analysis & Design Courseware

CPT 25800.

Section: Module 3

"Determining Requirements."

Content: University courseware on systems analysis consistently differentiates between business requirements (what the business needs to do) and technical requirements (how the system will be built). A goal like improving user experience is a business requirement

while specifying a management tool or an integration method is a technical/solution requirement.

To implement micro-segmentation with host isolation, even for VMs on the same host, a Private VLAN (PVLAN) is the appropriate technology. For this to be effective, the PVLAN configuration must be consistent across the entire traffic path. This means configuring the primary and secondary VLANs on both the physical Aruba switch and the VMware vSphere Distributed Switch (vDS) that the VMs connect to.

Once the VMs are in an isolated PVLAN, they cannot communicate directly at Layer 2. To enable controlled communication via a Layer 3 gateway (where firewall policies are applied), the gateway's Switched Virtual Interface (SVI) must respond to ARP requests on behalf of the isolated hosts. The ip local-proxy-arp feature on the SVI serves this exact purpose.

B. A generic "local firewall" on the VMware host is ambiguous and does not provide the required network-level isolation between VMs on a virtual switch.

C. Configuring PVLANs only on the physical switch is insufficient, as it would not prevent VMs on the same host from communicating directly through the local vSwitch.

1. ArubaOS-CX 10.11 IP Routing Guide

"ARP

" page 11. The guide states

"A primary use case for local proxy ARP is for private VLANs (PVLANs). In a PVLAN

hosts in the same secondary VLAN are prevented from communicating with each other directly. Communication must go through the router. Local proxy ARP allows the router to respond to ARP requests from hosts in the secondary VLANs." This directly supports the need for local proxy ARP (Option A).

2. VMware vSphere 8.0 Documentation

"Networking

" section "Configuring Private VLANs on a Distributed Switch." The documentation states

"The PVLAN configuration on the distributed switch must match the PVLAN configuration on the physical switch." This confirms that the PVLAN must be configured on both the switch and the VMware hosts for the solution to work (Option D).

3. ArubaOS-CX 10.11 Security Guide

"Private VLAN

" page 10. This document explains the function of isolated PVLANs: "Hosts connected to isolated ports can communicate only with hosts connected to promiscuous ports." This establishes the isolation principle that underpins the question's requirements.

Availability is a measure of a system's operational time. A 99.9% availability requirement implies an allowed downtime of 0.1% (100% - 99.9%). To calculate the total allowed downtime in hours per year, we first determine the total hours in a standard year: 365 days × 24 hours/day = 8760 hours.

The allowed downtime is then calculated as:

8760 hours/year × 0.1% = 8760 × 0.001 = 8.76 hours.

Rounding 8.76 hours to the nearest tenth gives 8.8 hours, which corresponds to option D.

A. 6.8 hours: This value is mathematically incorrect and does not correspond to a 99.9% availability level.

B. 3.4 hours: This is significantly less than the calculated 8.76 hours of allowed downtime for 99.9% availability.

C. 8.6 hours: While close, this is a less accurate rounding of the calculated 8.76 hours compared to 8.8 hours.

1. HPE. (2019). HPE NonStop for Dummies

2nd HPE Special Edition. John Wiley & Sons

Inc. In Chapter 2

"Defining High Availability

" a table shows that 99.9 percent availability equates to approximately 8.77 hours of downtime per year (p. 16). This value rounds to 8.8 hours.

2. Patterson

D. A.

& Hennessy

J. L. (2011). Computer Organization and Design: The Hardware/Software Interface (4th ed.). Morgan Kaufmann. Appendix B

"Assemblers

Linkers

and the SPIM Simulator

" discusses dependability metrics

including the formula for Mean Time To Failure (MTTF) and availability. The standard calculation method used is foundational in computer architecture and systems design courseware based on this text. The calculation is Availability = MTTF / (MTTF + MTTR)

which underpins the "nines" calculation.

3. Arpaci-Dusseau

R. H.

& Arpaci-Dusseau

A. C. (2018). Operating Systems: Three Easy Pieces. Arpaci-Dusseau Books. This university-level textbook

used in many computer science curricula

discusses availability concepts in the context of distributed systems (e.g.

Chapter 50)

reinforcing the standard mathematical approach to calculating downtime from a given availability percentage.

The HPE Aruba Networking switch selector is a pre-sales and solution design tool. It is accessible through two primary channels for partners and sales engineers. The first is the HPE PSNow (Partner Sales Now) portal, which is a suite of sales enablement tools for HPE partners. The second is the Intangi IRIS design tool, an HPE platform used for network design, validation, and quoting. IRIS integrates product selection capabilities to help architects and engineers build a valid Bill of Materials (BOM) for a proposed solution. Both platforms are key resources in the pre-sales and solution architecture phase.

B. Aruba Support Portal: This portal is for post-sales activities like technical support, software downloads, and license management, not for pre-sales product selection.

D. From NetEdit management tool: NetEdit is a network automation and configuration management platform for existing, deployed devices; it does not include pre-sales or hardware selection tools.

1. HPE Partner Ready Portal Documentation: The HPE PSNow (Partner Sales Now) toolset

accessible via the HPE Partner Ready Portal

includes various sales and quoting tools

among which are product selectors and configurators for building customer solutions. (Reference: "HPE Partner Ready Portal Sales Tools Overview"

specific internal partner documentation).

2. HPE Intangi IRIS Official Documentation: The Intangi IRIS platform is explicitly designed for "network design

validation

and quoting." A core function of this process is the selection of appropriate hardware

such as switches

from a built-in

updated product catalog to generate a Bill of Materials (BOM). (Reference: "HPE Intangi IRIS Datasheet"

Section: Features and Benefits).

A QSFP56 port operates at 200 Gbps, utilizing four electrical lanes, each running at 50 Gbps with PAM4 signaling (4x50G). A common and standard breakout configuration for this port is to split it into two separate 100 Gbps interfaces. Each of these 100 Gbps interfaces uses two of the 50 Gbps lanes (2x50G). The physical connectors for these 100 GbE breakout ends are typically QSFP28, which is the standard form factor for 100 GbE transceivers. This configuration is supported by HPE Aruba Networking switches and is documented in their official transceiver and cable guides.

A. QSFP56 -> 4x 50 GbE QSFP28: While a 200G port can break out to four 50G interfaces, the correct connector form factor for the 50G end is SFP56, not QSFP28.

C. QSFP56 -> 8x 10 GbE SFP+: This is not a standard breakout configuration. A QSFP56 port has four electrical lanes, and a direct breakout to eight individual interfaces is not supported by standard cables.

D. QSFP56 -> 4x 25 GbE SFP28: This is the standard breakout configuration for a 100 GbE QSFP28 port, not a 200 GbE QSFP56 port. This would also underutilize the 200G port's capacity.

1. HPE Transceiver and Cable Guide (Volume 17

March 2024): This guide explicitly lists breakout cables for this configuration.

Page 10

Table "HPE Direct Attach Copper (DAC) Cables": Lists part number R8P12A

described as "HPE 200G QSFP56 to 2x100G QSFP28 3m Breakout Direct Attach Copper Cable". This directly confirms option B.

Page 10

Table "HPE Direct Attach Copper (DAC) Cables": Lists part number R8P15A

described as "HPE 200G QSFP56 to 4x50G SFP56 3m Breakout Direct Attach Copper Cable". This confirms that the correct form factor for 4x50G breakout is SFP56

invalidating option A.

2. HPE Aruba Networking CX 9300 Switch Series Data Sheet (6AA8-2183ENW

November 2023): This document details the capabilities of switches using these high-speed ports.

Page 2

"Product highlights" section

under "High-density connectivity": Mentions "Flexible

high-density 1/10/25/40/50/100/200/400GbE connectivity with breakout". It further specifies that the 32 QSFP-DD ports can be configured for "2x100GbE"

which is the breakout scenario described in option B.

In a standard leaf-spine architecture, every leaf switch connects to every spine switch. The design specifies six racks, each with a pair of VSX Leaf switches, resulting in a total of 12 physical leaf switches (6 racks × 2 switches/rack). There are two spine switches.

The total number of physical point-to-point (P2P) links is calculated by multiplying the number of leaf switches by the number of spine switches: 12 leaves × 2 spines = 24 links.

Each P2P link requires two IP addresses, one for the interface on the leaf switch and one for the interface on the spine switch. Therefore, the total number of required addresses is 24 links × 2 addresses/link = 48 addresses.

A. 12: This represents the total number of physical leaf switches in the topology, not the number of IP addresses for the interconnects.

B. 96: This is double the correct number of addresses and does not correspond to any logical calculation for the described network topology.

C. 24: This represents the total number of physical P2P links between the leaf and spine layers, not the total number of IP addresses required.

1. Aruba Validated Solution Guide: Data Center Network with Aruba CX Switches (February 2021). The guide's topology diagrams (e.g.

Figure 1

page 8) illustrate the fundamental principle of leaf-spine design where each leaf switch has a physical connection to every spine switch. The IP addressing scheme for the underlay network is based on these physical links.

2. ArubaOS-CX EVPN-VXLAN Configuration Guide (for ArubaOS-CX 10.11). In the "Underlay and overlay design" section of Chapter 1

it states: "In a leaf-spine topology

the underlay consists of point-to-point links between the leaf and spine switches." This confirms that each physical connection is a distinct P2P link requiring its own addressing.

3. Aruba Campus Access for Large Networks Validated Solution Guide (May 2022). On page 21

in the "IP Addressing" section for the L3 access design (a leaf-spine model)

the guide recommends using /31 subnets for point-to-point links between access (leaf) and aggregation (spine) layers. A /31 subnet explicitly allocates two IP addresses

one for each end of the link

reinforcing the calculation of 2 addresses per link.

The post-installation handover is a critical phase where the deployment team transfers operational responsibility to the customer or their operations team. The core of this process involves providing "as-built" documentation that accurately reflects the final state of the deployed system. This includes archived configurations, which are the final, saved configurations of all network devices, and a detailed inventory list of all installed hardware and software. These documents are essential for future troubleshooting, maintenance, asset management, and change control.

A. Devices Datasheets: These are generic, pre-sales documents used during the design phase and do not reflect the specific "as-built" state of the deployed solution.

B. Devices Quick Specs: Similar to datasheets, these are high-level marketing or design-phase documents, not part of the final operational handover package.

C. Cost of the project: This is a commercial document related to project management and finance, not a technical document required for operating the network.

1. HPE Press. (2021). Aruba Design and Deploy Mobility Solutions Official Certification Study Guide (HPE7-A04). Chapter 10: Solution Deployment and Validation

Section: "Post-Installation Handover Deliverables

" pp. 345-347. This section explicitly lists final configuration files and a complete inventory of devices as mandatory handover documents.

2. HPE Aruba. (2022). Aruba Campus Wireless Networks Validated Solution Guide. Document ID: VSGCWN2022-08. Section 5.4: "Operational Handover

" p. 112. The guide specifies that the handover package must include as-built documentation

which consists of configuration backups and an asset inventory with serial numbers and locations.

"Five-nines" is a common industry term that refers to a system or service achieving 99.999% availability or uptime. This is a stringent standard typically required for mission-critical infrastructure. The remaining 0.001% represents the maximum allowable unplanned downtime over the service period. Calculated over a full year, 99.999% availability permits only about 5.26 minutes of total downtime. This metric is frequently specified in Service Level Agreements (SLAs) to guarantee a high degree of operational continuity.

A. PCI DSS is a security standard focused on protecting cardholder data; it does not define specific uptime percentages like "five-nines."

C. This describes a design methodology (redundancy) used to achieve high availability, not the availability metric itself.

D. This refers to the solution's expected lifespan and technological relevance, which is distinct from its operational uptime performance.

1. HPE Documentation: In discussions of high-availability solutions

HPE frequently references the goal of achieving "five-nines." For example

the HPE NonStop platform is designed for fault tolerance to deliver the highest levels of availability

often exceeding 99.999%.

Source: HPE NonStop Fundamentals (H4633S)

Module 1: Introduction to HPE NonStop

section on "Availability and Fault Tolerance." The courseware explains that NonStop systems are engineered for continuous availability

with "five-nines" being a benchmark for such critical systems.

2. Academic Courseware: University computer science and engineering courses on system reliability and design explicitly define this terminology.

Source: Patterson

D. A.

& Hennessy

J. L. (2017). Computer Organization and Design RISC-V Edition: The Hardware Software Interface. Morgan Kaufmann. In Chapter 6

"Parallel Processors from Client to Cloud

" the concept of availability is discussed

including a table that defines the "nines" and their corresponding annual downtime (e.g.

99.999% = 5.26 minutes/year).

3. HPE Technical White Paper: Documents detailing high-availability technologies like Aruba's Virtual Switching Extension (VSX) explain how these features help networks approach carrier-grade

five-nines availability.

Source: HPE ArubaOS-CX Switching High Availability Technical White Paper

Document Part Number: a00059622enw. The introduction and sections on VSX discuss the goal of minimizing downtime to achieve near-continuous network availability

a state often quantified as "five-nines."

The statement is incorrect because it presents an absolute condition that is not reflective of standard industry practice or Aruba's own methodologies. While the certified Aruba demo portal is a valuable, sanctioned, and often recommended tool for showcasing solutions in a controlled environment, it is not the only method that should be used. Other critical and frequently employed methods for demonstrating a proposed solution include:

On-premises Proof of Concept (PoC): Deploying physical or virtual Aruba hardware and software in the customer's own environment to validate the design, test performance, and demonstrate integration with their existing infrastructure. This is often essential for complex or large-scale opportunities.

Partner or In-House Lab Demonstrations: Utilizing dedicated lab environments built with actual Aruba equipment to create customized demonstrations that mirror a customer's specific requirements more closely than a generic portal demo might allow.

The choice of demonstration method is dictated by the customer's needs, the complexity of the proposed solution, and the objectives of the validation phase. Restricting demonstrations solely to a certified portal would preclude these other vital validation techniques.

The option "True" is incorrect because it imposes an artificial and impractical limitation. The process of designing and validating a complex network solution, which is the focus of the HPE7-A04 certification, explicitly involves validating the design against customer requirements. A physical PoC is a cornerstone of this validation process and is a method entirely distinct from a pre-configured demo portal. Official Aruba solution guides are themselves validated in physical lab environments, confirming this as an approved methodology.

1. HPE Press - Aruba Certified Design Expert (ACDX) Official Certification Study Guide (HPE7-A04): The guide outlines the comprehensive Aruba design methodology

which includes phases for requirements gathering

design

and validation. The validation phase is not restricted to a single tool. For instance

the guide discusses the importance of "validating the design with the customer

" a process that often necessitates a PoC to ensure the solution meets all technical and business requirements in the target environment. The concept of a flexible validation phase contradicts the idea of using only one specific portal.

2. Aruba Validated Solution Guides (VSG): These official documents detail reference architectures that have been tested and validated by Aruba engineers. For example

the Aruba SD-Branch Validated Solution Guide explicitly describes the "Lab Topology and Validation" (see Chapter 6 in typical versions). It details the physical and virtual equipment used in a dedicated lab to test and prove the solution's capabilities. This serves as official documentation that Aruba itself uses and sanctions lab-based validation—a form of demonstration—as a primary method for proving a solution's efficacy

separate from any demo portal.

3. HPE Certification & Learning

Exam Details for HPE7-A04: The official exam objectives state that a candidate must be able to "Produce the final design and validate it with the customer." This objective implies a process of confirmation and testing. A PoC is a primary method for such validation. The broadness of the term "validate" confirms that multiple methods are acceptable and necessary

not just a single portal.

The statement is false for two primary reasons. First, the Aruba CX 6200 Switch Series supports VSF (Virtual Switching Framework) stacking, but it does not support VSX (Virtual Switching Extension). VSX is a high-availability virtualization technology designed for core and aggregation switches, such as the Aruba CX 6400, 8xxx, and 10000 series, to provide redundancy and load balancing without traditional stacking. The CX 6200 is an access layer switch and is not equipped with this feature.

Second, the Aruba CX 6200 is not the only switch series that supports VSF. The Aruba CX 6300 Switch Series also supports VSF stacking. Therefore, the claim that the CX 6200 is the "only" switch with these capabilities is incorrect.

Why the "True" Option is Wrong:

Selecting "True" would incorrectly assert that the Aruba CX 6200 switch supports VSX technology, which it does not. It would also incorrectly claim exclusivity for VSF support to the CX 6200 series, which is also false as other series like the CX 6300 support it.

1. Aruba CX 6200 Switch Series Data Sheet: This document details the features of the CX 6200 series. Under "Performance and stacking

" it explicitly lists "Virtual Switching Framework (VSF)" allowing up to 8 switches to be stacked. The document makes no mention of VSX support for this series.

Source: Aruba CX 6200 Switch Series Data Sheet (Document ID: DSCX6200SeriesSKR01EN.pdf)

Page 2

"Product highlights" section.

2. ArubaOS-CX 10.12 VSX Configuration Guide: This official guide lists the specific switch series that support VSX. The Aruba CX 6200 is not on this list.

Source: ArubaOS-CX 10.12 VSX Configuration Guide

Chapter "Introduction to VSX

" Section "Applicable products." The listed products include the Aruba 6400

8325

8360

9300

and 10000 Switch Series.

3. ArubaOS-CX 10.12 VSF Configuration Guide: This guide confirms that VSF is not exclusive to the CX 6200 series.

Source: ArubaOS-CX 10.12 VSF Configuration Guide

Chapter "Introduction to VSF

" Section "Applicable products." The guide lists both the Aruba 6200 and 6300 Switch Series as supporting VSF.