DRAG DROP Correctly order the steps of the embedded module replacement procedure. https://kxbjsyuhceggsyvxdkof.supabase.co/storage/v1/object/public/file-images/Dell_D-PST-MN-A-24/page_12_img_1.jpg

Question 9 - Dell D-PST-MN-A-24 Real Exam Questions [Jan 2026 Update]

Q: 9

DRAG DROP Correctly order the steps of the embedded module replacement procedure.

Drag & Drop

Enable JavaScript to use the Drag & Drop feature.

Power down the node
Label and disconnect all cables attached to the embedded module
Align the embedded module with the empty slot and carefully push it into the slot
Remove the 4-port card from the old embedded module and install it into the new embedded module
Push the orange tab to release the lever of the embedded module

Correct Answer:

Answer Area Bucket 1: A. Power down the node Bucket 2: B. Label and disconnect all cables attached to the embedded module Bucket 3: E. Push the orange tab to release the lever of the embedded module Bucket 4: D. Remove the 4-port card from the old embedded module and install it into the new embedded module Bucket 5: D. Remove the 4-port card from the old embedded module and install it into the new embedded module

Explanation

The replacement procedure for a Dell PowerStore embedded module follows a strict safety and mechanical sequence:

Preparation: The node must be powered down (often via Service Mode) to ensure data integrity and electrical safety during the swap.
Disconnection: Physical cables must be labeled and disconnected before the module can be mechanically removed. Attempting to remove the module with cables attached can damage the ports.
Removal: The orange tab unlocks the release lever, allowing the module to be physically withdrawn from the chassis.
Transfer: The 4-port card (a sub-component) is not included with every replacement FRU; it must be transferred from the old module to the new one while both are out of the chassis.
Installation: Finally, the prepared new module (now containing the 4-port card) is aligned and inserted into the empty slot.

References

Dell Technologies. (2022). Dell PowerStore Installation and Service Guide (PowerStore 1000, 1200, 3000, 3200, 5000, 5200, 7000, 9000, and 9200). "Replace an embedded module," Section: Procedure. Retrieved from Dell.com.

Dell Technologies. (2022). PowerStore: Power Down and Reboot Procedures Guide. "Power off a node," p. 7-8. Retrieved from Dell.com.

Dell Technologies. (2021). Dell PowerStore 500T Installation and Service Guide. "Transfer the 4-port card," Section: Transfer parts.

Premium Access Includes

FLASH OFFER

avail 10% DISCOUNT on YOUR PURCHASE