The correct order of steps to install a PowerScale Gen6 in a rack is as follows:

Align the chassis with the rails that are attached to the rack.

Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.

Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.

Carefully push the chassis off the lift arms and into the rack.

Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.

Comprehensive Detailed Step by Step Explanation with Reference

To install a PowerScale Gen6 in a rack, you need to follow a systematic process that ensures both

safety and correct placement:

Align the chassis with the rails that are attached to the rack.

The chassis must be properly aligned with the rails in the rack, which will support the chassis during

the installation process.

Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.

Once aligned, slide the back of the chassis onto the supporting ledge of the rails, ensuring the chassis

is seated securely.

Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.

After the chassis is aligned and placed onto the rails, release the lift casters and push the chassis into

the rack with controlled force, using the lift mechanism.

Carefully push the chassis off the lift arms and into the rack.

Once the chassis is positioned on the rails, remove the support from the lift arms, and push the

chassis fully into the rack.

Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.

Finally, use screws to secure the chassis at the top and bottom points on both sides, ensuring it is

tightly fastened to the rack.

This order ensures a smooth, safe installation and proper alignment in the rack. Following these

steps is crucial for the stability of the PowerScale Gen6 system during operation​.